Solar self/diy install?

rodga

Honorary Master
Joined
May 9, 2007
Messages
11,682
Reaction score
1,680
Location
Gauteng
I have inverter, batteries and panels but 2 installers are now "too busy" to assist. So considering just doing it myself.
I can understand why most would like to supply and install.

Do we have a list of guys on the forum that have done a self/diy install? Any links to threads?
 
 
Don't do it, wait until you get an installer, unless it's not Grid Tied and you don't want a COC and accept all associated risks i.e. no insurance payout, void warranties etc.
 
If you're comfortable with general DIY, and willing to do some homework, this is very doable. Take a read through my thread and feel free to fire away if you have any questions.
 
I have inverter, batteries and panels but 2 installers are now "too busy" to assist. So considering just doing it myself.
I can understand why most would like to supply and install.

Do we have a list of guys on the forum that have done a self/diy install? Any links to threads?
the regulations are very clear as too who may install solar .by listening to chumps on a forum can get you very deeply on the wrong side of your insurance .you will have zero cover ,and its illegal for a wireman to coc your work afterwards ,an illegal coc sure ,but they have numbers and if there is an occurance that guy will be tracked down and somebody will be held accountable ,rather just hang on till a certified installer can do it for you ,one with a traceable wiremans liscence ,if the coc isnt an issue and you are prepared to take the risk of destroying your gear and house ,go for it .as an installation electrician i dont recommend it .
 
the regulations are very clear as too who may install solar .by listening to chumps on a forum can get you very deeply on the wrong side of your insurance .you will have zero cover ,and its illegal for a wireman to coc your work afterwards ,an illegal coc sure ,but they have numbers and if there is an occurance that guy will be tracked down and somebody will be held accountable ,rather just hang on till a certified installer can do it for you ,one with a traceable wiremans liscence ,if the coc isnt an issue and you are prepared to take the risk of destroying your gear and house ,go for it .as an installation electrician i dont recommend it .
Thanks will keep this in mind
 
it boils down to simple safety first .one dry joint one bad crimp can cost you thousands .
Aren't joints supposed to be dry? The few times I was using the guys always complained the joint was wet.
 
Aren't joints supposed to be dry? The few times I was using the guys always complained the joint was wet.
a dry joint is a joint thats not properly soldered or not crimped correctly as in oxygen free ,a dry joint creates heat and can start doing funky things .
 
  • Like
Reactions: W@P
Top
Sign up to the MyBroadband newsletter
X