Sonoff T2US switch not registering physical trigger

[abudabi]

I have 4 x 3 Gang T2US sonoff units installed on my house so far. One of the switches on one of the units is difficult to trigger. It usually requires 2 or 3 presses before it registers. All other switches are fine.

Anything I should look at or just send it back for warranty replacement?

 

[SmartKit]

I have 4 x 3 Gang T2US sonoff units installed on my house so far. One of the switches on one of the units is difficult to trigger. It usually requires 2 or 3 presses before it registers. All other switches are fine.

Anything I should look at or just send it back for warranty replacement?

Should work out the box without any issues - particularly if the other units operate correctly.

Maybe try a hard reset, but if that fails it could be a faulty device.

 

[abudabi]

Should work out the box without any issues - particularly if the other units operate correctly.

Maybe try a hard reset, but if that fails it could be a faulty device.

Thanks for your comments. Something I stumbled across yesterday:

I took my passage switch cover off yesterday to touch up paint around the switch where I had to fill up some plaster. Upon clipping it back that evening the same thing started happening to it. Immediate thoughts were doom and gloom but then upon closer inspection I notice the clip on the side was not on properly. So the cover was kind of bowed out in the middle. After fixing that it's working as it should.

A cursory glance at the lounge switch indicates that it's not the same issue unfortunately... but will reseat the cover anyway.