Spraying on Plasti dip without peeling it off.

[DTBA]

I got a little spot on my bakkie I want to spray with Plasti dip.

I am going to mask up the area but how do I spray it so that when I peel off the tape that it does not drag the plasti dip with it?

They said you need to do it while the dip is wet, but how is this possible when they tell you to spray on 4 layers and let them dry between layers?:wtf:

 

[skeptic_SA]

Apply 4 layers of masking tape on top of one another with a slight stagger so you can get a blade under it. Spray first coat. Allow to dry. Remove top layer of tape. Repeat process 3 more times removing successive layers of tape?

I've never used the stuff. Above info is a flyer...

 

[DTBA]

Apply 4 layers of masking tape on top of one another with a slight stagger so you can get a blade under it. Spray first coat. Allow to dry. Remove top layer of tape. Repeat process 3 more times removing successive layers of tape?

I've never used the stuff. Above info is a flyer...

Could work.. Just a huge job.

Same here going to be my first time

 

[DTBA]

bump for the day ^ Somebody must have some experience with plasti dip

 

[Purply]

Maybe chat to this guy, seems to know what he's doing

http://mybroadband.co.za/vb/showthread.php/692158-Smart-car-Plasti-Dipped

 

[ahoudet]

I just removed the tape but pulled downwards rather than towards me... worked for the most part

 

[DTBA]

Thanks guys. also pmed him

 

[Colin62]

Thanks guys. also pmed him

I'm pretty sure that his only reason for posting here was to drum up some extra business, but maybe I'm wrong and he'll actually help you out.

 

[Zenbaas]

BUMP

Anyone know of any physical shops in JHB that sell the 1L cans...?