Does anyone here know what the values are to get a telkom vdsl line up on a Cisco router? I have a 887vag and have upgraded from 10mbit/s to 20mbit/s. After the upgrade the router does not sync anymore and I can not for the life of me get it to work. Google doesn't help with South Africa specific settings either. I have tried to get it working by myself, as well as asking telkom, but still no luck, this is the output of the vdsl interface I can see and debug log outputs are not much more helpful:
stratt#sh cont vdsl 0
Controller VDSL 0 is DOWN
Daemon Status: Establishing Link
XTU-R (DS) XTU-C (US)
Chip Vendor ID: 'BDCM' 'P '
Chip Vendor Specific: 0x0000 0x0000
Chip Vendor Country: 0xB500 0xB500
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x4602 0x0000
Modem Vendor Country: 0xB500 0x0000
Serial Number Near: FCZ1614C2QR C887VAG+ 15.4(2)
Serial Number Far:
Modem Version Near: 15.4(2)
Modem Version Far: 0x0000
Modem Status: Unknown
DSL Config Mode: AUTO
Trained Mode:
TC Mode: UNKNOWN
Selftest Result: 0x00
DELT configuration: disabled
DELT state: not running
Trellis: OFF OFF
SRA: disabled disabled
SRA count: 0 0
Bit swap: enabled enabled
Full inits: 0
Failed full inits: 318
Short inits: 2
Failed short inits: 64
Firmware Source File Name (version)
-------- ------ -------------------
VDSL embedded VDSL_LINUX_DEV_01212008 (1)
Modem FW Version: 130205_1433-4.02L.03.A2pv6C035j.d23j
Modem PHY Version: A2pv6C035j.d23j
Vendor Version: Ap6v35j.23j 68
Training Log : Stopped
Training Log Filename : flash:vdsllog.bin
stratt#sh cont vdsl 0
Controller VDSL 0 is DOWN
Daemon Status: Establishing Link
XTU-R (DS) XTU-C (US)
Chip Vendor ID: 'BDCM' 'P '
Chip Vendor Specific: 0x0000 0x0000
Chip Vendor Country: 0xB500 0xB500
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x4602 0x0000
Modem Vendor Country: 0xB500 0x0000
Serial Number Near: FCZ1614C2QR C887VAG+ 15.4(2)
Serial Number Far:
Modem Version Near: 15.4(2)
Modem Version Far: 0x0000
Modem Status: Unknown
DSL Config Mode: AUTO
Trained Mode:
TC Mode: UNKNOWN
Selftest Result: 0x00
DELT configuration: disabled
DELT state: not running
Trellis: OFF OFF
SRA: disabled disabled
SRA count: 0 0
Bit swap: enabled enabled
Full inits: 0
Failed full inits: 318
Short inits: 2
Failed short inits: 64
Firmware Source File Name (version)
-------- ------ -------------------
VDSL embedded VDSL_LINUX_DEV_01212008 (1)
Modem FW Version: 130205_1433-4.02L.03.A2pv6C035j.d23j
Modem PHY Version: A2pv6C035j.d23j
Vendor Version: Ap6v35j.23j 68
Training Log : Stopped
Training Log Filename : flash:vdsllog.bin