Telscum 5100 Web Server Setup

[skilpad]

Hi everyone,
I recently got a 5100 from Telscum and I am currently trying to setup a web server.I use Abyss Web Server on port 8080 with a NO-IP Account with a redirect port to 8080.I try to set my nat to 8080 8080 10.0.0.100 but that does not work.

All I get is connection refused from (my IP:8080).When I originally set up the server for port 80 (Including NO-IP) I got to my 5100's setup page.
Is there any way in which I can config the system to work like a 56k where my ports are my ports.Please help.

Thx in advance

Skilpad

 

[Franna]

Have a look at: http://www.portforward.com/english/routers/port_forwarding/Telkom/5100DSL/default.htm

It seems like the NAT setting of "8080 8080 10.0.0.100" is correct.

Are you using http://165.165.xxx.xxx:8080 in your browser to connect to the webserver?

 

[skilpad]

My no-ip automaticaly redirects to http://xxxx.no-ip.com:8080

 

[skilpad]

I don't have the firwall tab in my router setup

 

[skilpad]

I just did a port scan on my IP and only port 80(Router) is open.

 

[skilpad]

here are my settings

WAN Information:
Mode: Routing
Encapsulation: PPPoE
Multiplexing: LLC
VPI/VCI: 8/35
Service Name:
User Name:
Password: ****--
IP Address: Obtain an IP Address Automatically
Network Address Translation: SUA Only
Connection: Nailed-Up Connection

LAN Information:
IP Address: 10.0.0.2
IP Mask: 255.255.255.0
DHCP: ON
Client IP Pool Starting Address: 10.0.0.100
Size of Client IP Pool: 100

thx

 

[stormwalkerza]

Greetings

If I understand your setup, you cannot view your own server from the same pc (http://xxxx.no-ip.com:8080) directly.

To see if its working google for a free proxy and use that as a loopback to your pc, then you will see it working.

Cheers

 

[skymedic]

I want to setup my Router at Home and at the office so that I can work on the office PC from home.

I use VNC viewer/ server to do this, and have also registered a static IP with no-ip.com.

I want to achieve

VNC VIEWER PC - Marconi Router ------------- 5100 Router - PC-VNC SERVER

The only problem now is where and how to set it up!
Any help?

Thanx