tp-link AX1500 x2 with Cudy's CD-M30002 x2 Mesh System

[newklear]

Hi guys!

Need some advice please. I have already purchased 2 tp-link Ax1500 WiFi 6 Routers.

I get the 500mB the on1 tp-link Ax1500 already via WiFi. I would like to spread my signal best I can. I see the Cudy's CD-M30002 has 1x 2.5Gbps port and offers a 574Mbps dual band Wifi system


Was thinking of turning the one tp-link Ax1500 into an Access Point for the other side of my house then using the Cudy's CD-M30002 for the far side of my house. Will these 2 different devices work with one another ?

 

[Anthro]

I see no-one responded yet ..
They use different protocols to Mesh, incompatible with each other.
So unless you can have some form of 'repeater' option in any of the interfaces you are straight out of luck, and would be better off standardizing on either Cudy or TP-Link Deco, or if you are so inclined run cables to each from your main switch / distribution point.

 

[newklear]

I see no-one responded yet ..
They use different protocols to Mesh, incompatible with each other.
So unless you can have some form of 'repeater' option in any of the interfaces you are straight out of luck, and would be better off standardizing on either Cudy or TP-Link Deco, or if you are so inclined run cables to each from your main switch / distribution point.

Thanks for the reply.

I have already ordered the Cudy's as they were on special. I have already meshed the 2 Ax1500's and I get pretty decent speeds in most parts of the house. When the Cudy's arrive, I will just cable them into each respective router using Cat6 to extend coverage.

 

[_Jakes_]

I can trade you an AX1500 and a AX300 for the 2 cudy's?

 

[newklear]

I can trade you an AX1500 and a AX300 for the 2 cudy's?

Thanks for the offer but it is cool thanks!