Trixbox: zaphfc: empty HDLC frame or bad CRC received

M

micomp

New Member
Joined
Aug 30, 2006
Messages
1
Reaction score
0
Hi

I'm using trixbox 1.0 + HFC ISDN card, where lspci returned

00:09.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)

After running install-ZAPHFC all seems to work properly, but after a while I get these errors:

zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 0).
zaphfc: empty HDLC frame or bad CRC received (framelen = 7, stat = 0xff, card = 0).
zaphfc: empty HDLC frame or bad CRC received (framelen = 4, stat = 0xff, card = 0).
zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 0).
................
................

This problem causes asterisk to crash...

Is this a problem with Telkom ISDN?
Has anyone the same problem?

Thanks for your help
 
micomp said:
Hi

I'm using trixbox 1.0 + HFC ISDN card, where lspci returned

00:09.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)

After running install-ZAPHFC all seems to work properly, but after a while I get these errors:

zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 0).
zaphfc: empty HDLC frame or bad CRC received (framelen = 7, stat = 0xff, card = 0).
zaphfc: empty HDLC frame or bad CRC received (framelen = 4, stat = 0xff, card = 0).
zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 0).
................
................

This problem causes asterisk to crash...

Is this a problem with Telkom ISDN?
Has anyone the same problem?

Thanks for your help
Click to expand...

Hi

Yes i have the same problem but no one what to help :(

if someone find hot to fix this please let me know :(

Regards
Goran
 
Gerry said:
Save yourself the pain and get a Digium Bri card. It is cheap and works. http://www.miro.co.za/v2.1/frames/product.php?product=118
Click to expand...

I gave Miro a call and asked them about the card you say works. They told me it is a Duxbury HFC card. To confirm, I called Duxbury and gave the serial number of the HFC card I have. He told me the cards are the same.

I tried a clean CD install of Trixbox 1.2 with the Cologne Chips HFC card installed in the box. A Dell Optiplex GX240 P4 1.6 768MB.

After all the initial reboots and setting the IP, I did the install-ZAPHFC -f t -R
chose Yes to download the updated script and settled for the 1.2.7 ver of Asterisk to patch with BRIstuff

I get the following:
zaphfc[0]: empty HDLC frame received

running ztcfg -vv I get:

Zaptel Configuration
=================

SPAN1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Clear Channel (Default) (Slaves: 01)
Channel 02: Clear Channel (Default) (Slaves: 02)
Channel 03: D-Channel (Default) (Slaves: 03)

3 channels configured.

So, it all looks ok?!

Doing a lspci I get:
02:08.0 Network Controller: Cologne Chips Designs GmbH ISDN Network Controller [HFC-PCI] (rev02)

I reboot the box. Tells me that Asterisk Died.

I try to configure and add the modules with freePBX.
When I try configure extensions, it says: This module requires access to the Asterisk Manager. Please ensure Asterisk is running and access to the manager is available.

I am a newbie and know very little about Linux and the recompile stuff.

Where did I go wrong? Can anyone help?

MadDogMike

:(
 
Your asterisk process has died.

It probably exited somewhere near the initialization of the card.

SSH to your asterisk box, and check the last few lines of your full_log.
There should be some clues in there.
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X