TV link on HD PVR 2P and D

[Dosti786]

Hi,

I currently have the DSD PVR HD 2P, and DSD 1131. I have linked them via extraview. Had a snowy picture when running through RF cable. That has been resolved. I have both decoders in my lounge and ran a TV link through to the room. The light on the TV Link is off. I have connected my DSTV as follows:-
- Twin LNB goes directly through the switch with Receiver 1 and 2 going to the HD PVR, receiver 3 is going to the. DSD 1131.
- RF in on the HD PVR 2P is connected to RF out on the DSD 1131.
- RF out on the HD PVR 2P is connected to the TV link which does not work, though projecting video and audio to the bedroom.
- TV link is enabled on the HD PVR 2, though the red light on the TV Link is off, where can the problem be?

 

[mika1000]

try the DSTV forum. they solved my problem. had a similar problem and got the heartbeat error on the screen after a few minutes.

 

[cpu.]

- RF in on the HD PVR 2P is connected to RF out on the DSD 1131.

Primary decoder RF-out to secondary decoder RF-in. Is the 1131 primary?

 

[isie]

Primary decoder RF-out to secondary decoder RF-in. Is the 1131 primary?

Doesnt have to be rf out to rf inyou can mix those up any way as long as the same settings are on the dstv decodder

@ Dosti786 do you have a splitter splinting the rf cable to the bedroom, it could be one that doesn’t allow dc pass, so no power going to the tv link