Updating Adaptec Raid Card driver CentOS 7

[WAslayer]

So I am trying to update the raid card driver on my server, since this is the suggested resolution for the scsi bus appears hung message, which pops up the moment any significant I/O load is pushed to the raid volume.

So, following the update procedure from Adaptec, I get the following message:

Anyone had to deal with this and manage to get it sorted?

rpm -ivh /root/kmod-aacraid-RHEL7.0-1.2.1-41024.x86_64.rpm
error: Failed dependencies:
kernel(__scsi_iterate_devices) = 0x8c555679 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_add_device) = 0x77f3c96a is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_add_host_with_dma) = 0x88ffb5db is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_adjust_queue_depth) = 0x86fdc67c is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_block_requests) = 0xc2b8e543 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_device_lookup) = 0xebbf3003 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_device_put) = 0x6f73dc23 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_device_set_state) = 0xf1b26b64 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_dma_map) = 0x9d92c892 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_dma_unmap) = 0xefcb41bd is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_host_alloc) = 0xd905558c is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_host_put) = 0x6764c5dd is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_remove_device) = 0xcd3a2f58 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_remove_host) = 0xe60f35a8 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_scan_host) = 0x932ba1ef is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_unblock_requests) = 0x3a61ac7f is needed by kmod-aacraid-1.2.1-41024.el7.x86_64

 

[Murlin]

Hi There

I know Centos 5 needs the below with the Adaptec Cards

yum install kernel-headers
yum install kernel-devel
yum install gcc

So I am trying to update the raid card driver on my server, since this is the suggested resolution for the scsi bus appears hung message, which pops up the moment any significant I/O load is pushed to the raid volume.

So, following the update procedure from Adaptec, I get the following message:

Anyone had to deal with this and manage to get it sorted?

rpm -ivh /root/kmod-aacraid-RHEL7.0-1.2.1-41024.x86_64.rpm
error: Failed dependencies:
kernel(__scsi_iterate_devices) = 0x8c555679 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_add_device) = 0x77f3c96a is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_add_host_with_dma) = 0x88ffb5db is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_adjust_queue_depth) = 0x86fdc67c is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_block_requests) = 0xc2b8e543 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_device_lookup) = 0xebbf3003 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_device_put) = 0x6f73dc23 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_device_set_state) = 0xf1b26b64 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_dma_map) = 0x9d92c892 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_dma_unmap) = 0xefcb41bd is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_host_alloc) = 0xd905558c is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_host_put) = 0x6764c5dd is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_remove_device) = 0xcd3a2f58 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_remove_host) = 0xe60f35a8 is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_scan_host) = 0x932ba1ef is needed by kmod-aacraid-1.2.1-41024.el7.x86_64
kernel(scsi_unblock_requests) = 0x3a61ac7f is needed by kmod-aacraid-1.2.1-41024.el7.x86_64

 

[WAslayer]

seems at some point between yesterday and today, the server updated to 7.1, after an install using the 7 iso.. I have managed to update the driver and the firmware on the card.. before and after the update i was, and still am, stuck with

the apparant fix is to update the drivers and firmware for the card...