Waterproof 230v Connectors

Grubscrew

Executive Member
Joined
Sep 15, 2008
Messages
6,830
Reaction score
5,806
Location
Centurion
So I like Christmas lights....

But is it is becoming a schlepp to disconnect and remove them when it looks like rain or when we are not home. I am not against cutting of the existing two pin plugs to make this work.

Suggestions or ideas please.
 
You will have to give more details. Are we talking permanent weaterproof plug points or do you want to weatherproof extension leads?
 
You will have to give more details. Are we talking permanent weaterproof plug points or do you want to weatherproof extension leads?
Sorry temporary at most, will be taken down after Christmas. So waterproof extensions or similar.
 
So I like Christmas lights....

But is it is becoming a schlepp to disconnect and remove them when it looks like rain or when we are not home. I am not against cutting of the existing two pin plugs to make this work.

Suggestions or ideas please.
I have two outside plugs. One item is permanently plugged in.


Not sure of it can help since the wires must be properly sealed.

Alternatively, you could probably get ip65 junction box to do the connections of the wires.
 
Just realised I did not explain my suggestions.

1. Depending on how long or short the light power cable is, you could use an outside outlet. Cut the twin plug and replace with a 3 pin and plug in it this. Mine was already installed when I bought my house. You might have to get an electicrian in.

2. If you need to lengthen your power cord from the lights, you can connect the wire in a ip65 junction box.
 
Also found these today:


and


Thinking about making massive leads now to each Christmas light and run the cables tastefully out of sight and away from the lawnmower to.
 
Also found these today:


and


Thinking about making massive leads now to each Christmas light and run the cables tastefully out of sight and away from the lawnmower to.
I would rather use conduit and proper junction boxes and outside power and just plug in the xmas lights in every year. With a bit of planning, you can use it for things. Outside power is very convienient. It is worth doing it right.
 
Also found these today:


and


Thinking about making massive leads now to each Christmas light and run the cables tastefully out of sight and away from the lawnmower to.
I would rather use conduit and proper junction boxes and outside power outlets and just plug in the xmas lights in every year. With a bit of planning, you can use it for other things. Outside power is very convienient. It is worth doing it right.
 
Just remove all plugs and connect all the wires with insulation tape. Been doing it for years with all the Christmas lights.
I have also used these male female quick connectors for where there is many different xmas lights on one line, and then just insulation tape them for the rain.
image_file__97013.jpg
 
So I like Christmas lights....

But is it is becoming a schlepp to disconnect and remove them when it looks like rain or when we are not home. I am not against cutting of the existing two pin plugs to make this work.

Suggestions or ideas please.

Empty 2l cold drink bottle. Cut slit on side, squeeze connectors / plugs in there. Lay it down with cut on bottom. Seal with duct tape if you want.
 
Top
Sign up to the MyBroadband newsletter
X