What am i doing wrong?

[Defib]

Greetings

I have setup a NO-IP account and installed it on my Raspberry pi with the DUC

I have also set the raspberry pi with a static ip of 10.0.0.4

The router i am using is a telkom netgear dgn2200v2 which perhaps sucks largely

I have also created a service called Pi and forwarded port 2212 to the raspberry pi IP of 10.0.0.4

I have also created a firewall rule on the router

have any of you had issues with port forwarding with this router? It does not work for me, or am i doing something wrong?

 

[SauRoNZA]

LTE/3G by any chance?

 

[stricken]

Certain conditions does not allow you to be on the same NAT domain as your are trying to route over the Internet to.

Try 3G or something to access your dynamicdomainname.xyz:2212

I assume you actually have something listening on 2212 on the Pi. A telnet 10.0.0.4 2212. will confirm if it responds.

 

[stricken]

LTE/3G by any chance?

And yes. If your ISP blocks ports you need to get on an unrestricted APN.. or STUN a proxy / use a VPN

 

[Defib]

My connection is DSL with VOX so i am not sure they are blocking. I have tried from an outside connection to access and it wont budge

I have been told these dgn2200Mv2's are rubbish to PF

 

[PhireSide]

http://www.noip.com/support/knowledgebase/what-port-does-the-dynamic-update-client-use/

Try open port 80, port 443 and port 8245 and see if it makes a difference?

EDIT: Open port 80 with caution

 

[Defib]

maybe leave port 80 alone hahaha - I have tried many ports even above 1000. Each time i use the canyourseeme, it says time out

 

[SauRoNZA]

My connection is DSL with VOX so i am not sure they are blocking. I have tried from an outside connection to access and it wont budge

I have been told these dgn2200Mv2's are rubbish to PF

Obvious question is can you access whatever is running on that port directly without DNS?

If the Port Forward option is on the router it will work. People saying it's crap probably means it's hard to work with, not that it doesn't work.

Screenshot?

 

[SauRoNZA]

http://www.noip.com/support/knowledgebase/what-port-does-the-dynamic-update-client-use/

Try open port 80, port 443 and port 8245 and see if it makes a difference?

EDIT: Open port 80 with caution

Those are required for OUTGOING traffic.

Shouldn't require any opening on any consumer device.

He wouldn't be able to browse this website or any other if that wasn't working.

 

[Defib]

I have only tried to SSH in on it port 22, used whilst on the LAN (success, how i chat to the Pi)

I have also tried to PF port 22 with the same defeat.

I cant sadly do anything as the setup is at home and im about 40km at work for the night

 

[PhireSide]

Is the DUC client updating properly? You should be able to see on the website in your profile which IP address it currently has assigned.

 

[Defib]

Well as i mentioned, that I couldnt tell as I am not near my house/setup

 

[Defib]

Server error - server 197.245.xxx.239 is unreachable at this moment.

 

[Defib]

The best i can do it log onto VOX and compare IP session with NO-IP which i have done and they match