How would you do it?
This network used to work now its broken
eth = ethernet cable
The RBs are there as switches - The 950 has all 5 ports in the switch (and wifi ap bridged), the RB750 has ports 2-5 in switch(port 1 is not part of the switch) (Because this was what I had available)
DHCP server is on the router. Devices at the 2nd Unifi AP cant get an IP Address most of the time (occasionally it works) Internet is not working on devices connected to the 2nd Unifi AP (but the Unifi controller software shows everything is adopted and wifi uplink is operating [signal 50%])
At RB750 (Office B) I have a Totolink AP in bridge mode
When I take out RB750 and connect it only to the laptop with ethernet cable I can configure it and its working. When its in the network, I cant connect to it. My laptop is in office B connecting to Totolink AP and can access internet. I can connect Winbox/Putty(SSH) to RB950 but not RB750? But the totolink AP is plugged into the RB750 ? what is happening?
This network used to work now its broken
Code:
[ ---- Office A ------ ] ---- [ - Office B - ] ------ [outside Office B] - 48m - [Outside Home] ----- [inside home]
Internet - Router - eth - RB950 --- eth --- RB750 ----- eth ---- Unifi Outdoor ap - wifi - Unifi Outdoor AP - eth - TP-Link AP
| |
More devices Totolink AP
eth = ethernet cable
The RBs are there as switches - The 950 has all 5 ports in the switch (and wifi ap bridged), the RB750 has ports 2-5 in switch(port 1 is not part of the switch) (Because this was what I had available)
DHCP server is on the router. Devices at the 2nd Unifi AP cant get an IP Address most of the time (occasionally it works) Internet is not working on devices connected to the 2nd Unifi AP (but the Unifi controller software shows everything is adopted and wifi uplink is operating [signal 50%])
At RB750 (Office B) I have a Totolink AP in bridge mode
When I take out RB750 and connect it only to the laptop with ethernet cable I can configure it and its working. When its in the network, I cant connect to it. My laptop is in office B connecting to Totolink AP and can access internet. I can connect Winbox/Putty(SSH) to RB950 but not RB750? But the totolink AP is plugged into the RB750 ? what is happening?