Alternative Cryptocurrencies (General Discussion & Trading)

acidrain said:
As long as you have your private key for the ETC wallet you can use it where-ever the clo coins are supported, be it an exchange, mew when the network is released, or any other compatible wallet. Right now it's likely not shown because the network is not yet running.
Click to expand...

OK thanks.

Yeah I printed my private key and also wrote it down :)

So there is nothing else I need to do then?
 
weelzSA said:
Great thanks.

Just edited the .BAT file now and going to start. Hopefully all works.

All I added was ETC address, miner name and email address. There was nothing I had to change?
Click to expand...

It depends if you are undervolting/overclocking via the BAT file, but for nanopool mining ETH the -ewal for me was:

-ewal 0x38F9bb4df872CA8B2D5bFb398060D0c8fD85F005.SionRig

In other words, <Address>.<Rig Name>

Need the rig name when monitoring via their website to distinguish between your rigs, if you have more than one.
 
I am having a problem all day so far.

Edited BAT file and when I start it I get the following error:

CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions

Any idea what could cause this?

I have set my Virtual memory to:

Initial size - 16001MB
Maximum size - 50001MB

Any idea what else I can try?
 
Time for etn to go to the moon!
c9e37692d025e8787b056622e4e852f7.jpg
 
weelzSA said:
6 x 3GB 1060's

I can run Claymore (eth only) without any problems.
Click to expand...

Was meant to edit that. ETC dag isn't near 3GB so my question is irrelevant.

Does appear to be an issue loading the dag file to gpu though. Virtual mem won't do anything as with the new claymore miners, dag is loaded directly into gpu rather than using the cpu. Wierd issue though since you say ETH works fine.

If anything just mine ZCL on miningpoolhub and auto convert to ETC. You'll should get more that way since zcl is priced higher.
 
Last edited:
acidrain said:
Was meant to edit that. ETC dag isn't near 3GB so my question is irrelevant.

Does appear to be an issue loading the dag file to gpu though. Virtual mem won't do anything as with the new claymore miners, dag is loaded directly into gpu rather than using the cpu. Wierd issue though since you say ETH works fine.
Click to expand...

I used to run into this issue a few times as well and normally a reboot just fixed it.
 
acidrain said:
Was meant to edit that. ETC dag isn't near 3GB so my question is irrelevant.

Does appear to be an issue loading the dag file to gpu though. Virtual mem won't do anything as with the new claymore miners, dag is loaded directly into gpu rather than using the cpu. Wierd issue though since you say ETH works fine.

If anything just mine ZCL on miningpoolhub and auto convert to ETC. You'll should get more that way since zcl is priced higher.
Click to expand...

Thanks for the reply.

How do I mine ZCL - using claymore or NiceHash? Sorry new to all this mining and not 100% clued up on all mining software etc.
 
SilverNodashi said:
I used to run into this issue a few times as well and normally a reboot just fixed it.
Click to expand...

Rebooted a few times and same issue.

What is weird is Claymore running ETH only works perfectly every time - been running without issue for last couple weeks and again since I re-started yesterday.
 
I've been trying to get the EWBF miner to run but it seems to just freeze, I get to this point and it does nothing.

+-------------------------------------------------+
| EWBF's Zcash CUDA miner. 0.3.4b |
+-------------------------------------------------+
INFO: Current pool: zcl.2miners.com:2020
INFO: Selected pools: 1
INFO: Solver: Auto.
INFO: Devices: All.
INFO: Temperature limit: 90
INFO: Api: Disabled[/B]

What do your guys bat file look like?
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X