Lightseeker
Member
- Joined
- Feb 15, 2008
- Messages
- 11
- Reaction score
- 0
This Saturday (19-07-2008) Angus Buchan will be preaching at Loftus stadium Pretoria, with a estimated attendance of 67000 people. If you want, check it out, this event will be broadcasted live on GOD TV around the world (DSTV locally) and on the following Radio stations: Rippel, impact and pulpit.
http://uk.god.tv/Publisher/Article.aspx?id=1000034695
To tune into GOD TV on DSTV do the following:
Multichoice Decoder: Single & Dual View
# Press menu on remote
# Advanced options-OK
# Dish installations-OK
# 9949
# (7) Reset to factory defaults – OK - OK
# When done scanning
# Press menu on remote
# Advanced options-OK
# Dish installations-OK
# 9949
# Go to Network 2 then press the right arrow button until you see the word “other”
# DO NOT PRESS OK
# Scroll down to (6) Scan All Networks – OK-OK
# When done scanning
To watch God Channel:
1. On your remote control, press TV button
2. Press the ‘Up Arrow” button on your remote
3. Find and select PUBLIC PAS 7/10 and press OK
4. Press the P+ button on your remote until you find the GOD CHANNEL
Multichoice Decoder: PVR & {old single view (+- 5 yrs)}
# On your REMOTE CONTROL Press the MENU button
# Press 6 for ADVANCED OPTIONS
# Press 1 for DISH INSTALLATIONS
# Enter PIN code: 9949
# Press 1 for LNB CONFIGURAGTON and press OK
# Press 2 for LNB 2 SETUP (Option A, Position B) and press OK
# Press 1 for LNB. It should be “DISABLED. Press OK
# Press the left arrow button once, ‘DISABLED’ should now change to ‘ENABLED’. Press OK
# Go to Option 8, ACCEPT THESE SETTINGST and Press OK
# Press EXIT once
# Press 2 for NETWORK CONFIGURATION
# Press 2 for NETWORK 2 SETUP. (If 2 is grayed out, use NETWORK 3 SETUP)
# On SIGNAL SETUP press the OK to highlight DISABLED
# Press ‘Right arrow’ (>) to change ENABLED and press OK
# Make sure #2 ‘ORBITAL POSITION’ is PAS 7/10
# Make sure #3 ‘USE NIT’ is YES
# Press 4 for FREQUENCY: (You may need to press OK Before the next step)
# Press ‘Left arrow button (<) 5 times
# Enter 11170 and press OK to save
# Press 5 for SYMBOL RATE: (you may need to press OK before the next step)
# Press the ‘left arrow’ button (<) 5 times
# Enter 26652 & OK to save
# Make sure #6 POLARIZATION’ is VERTICAL
# Press 7 for FEC (you may need to press OK before the next step)
# Press left arrow button (<) 3 tunes until it reads 5/6
# Press OK button to save
# Press 8 to VIEW SIGNAL STRENGHT then press OK button to save
# When saved press EXIT — once only!
# Press 4 to SCAN ALL NETWORKS
# After Scanning process is complete, receiver may go to channel 1 or to another DSTV channel
# Go to channel 4 which should be MOVIE MAGIC
To watch God Channel:
1. On your remote control, press TV button
2. Press the ‘Up Arrow” button on your remote
3. Find and select PUBLIC PAS 7/10 and press OK
4. Press the P+ button on your remote until you find the GOD CHANNEL
http://uk.god.tv/Publisher/Article.aspx?id=1000034695
To tune into GOD TV on DSTV do the following:
Multichoice Decoder: Single & Dual View
# Press menu on remote
# Advanced options-OK
# Dish installations-OK
# 9949
# (7) Reset to factory defaults – OK - OK
# When done scanning
# Press menu on remote
# Advanced options-OK
# Dish installations-OK
# 9949
# Go to Network 2 then press the right arrow button until you see the word “other”
# DO NOT PRESS OK
# Scroll down to (6) Scan All Networks – OK-OK
# When done scanning
To watch God Channel:
1. On your remote control, press TV button
2. Press the ‘Up Arrow” button on your remote
3. Find and select PUBLIC PAS 7/10 and press OK
4. Press the P+ button on your remote until you find the GOD CHANNEL
Multichoice Decoder: PVR & {old single view (+- 5 yrs)}
# On your REMOTE CONTROL Press the MENU button
# Press 6 for ADVANCED OPTIONS
# Press 1 for DISH INSTALLATIONS
# Enter PIN code: 9949
# Press 1 for LNB CONFIGURAGTON and press OK
# Press 2 for LNB 2 SETUP (Option A, Position B) and press OK
# Press 1 for LNB. It should be “DISABLED. Press OK
# Press the left arrow button once, ‘DISABLED’ should now change to ‘ENABLED’. Press OK
# Go to Option 8, ACCEPT THESE SETTINGST and Press OK
# Press EXIT once
# Press 2 for NETWORK CONFIGURATION
# Press 2 for NETWORK 2 SETUP. (If 2 is grayed out, use NETWORK 3 SETUP)
# On SIGNAL SETUP press the OK to highlight DISABLED
# Press ‘Right arrow’ (>) to change ENABLED and press OK
# Make sure #2 ‘ORBITAL POSITION’ is PAS 7/10
# Make sure #3 ‘USE NIT’ is YES
# Press 4 for FREQUENCY: (You may need to press OK Before the next step)
# Press ‘Left arrow button (<) 5 times
# Enter 11170 and press OK to save
# Press 5 for SYMBOL RATE: (you may need to press OK before the next step)
# Press the ‘left arrow’ button (<) 5 times
# Enter 26652 & OK to save
# Make sure #6 POLARIZATION’ is VERTICAL
# Press 7 for FEC (you may need to press OK before the next step)
# Press left arrow button (<) 3 tunes until it reads 5/6
# Press OK button to save
# Press 8 to VIEW SIGNAL STRENGHT then press OK button to save
# When saved press EXIT — once only!
# Press 4 to SCAN ALL NETWORKS
# After Scanning process is complete, receiver may go to channel 1 or to another DSTV channel
# Go to channel 4 which should be MOVIE MAGIC
To watch God Channel:
1. On your remote control, press TV button
2. Press the ‘Up Arrow” button on your remote
3. Find and select PUBLIC PAS 7/10 and press OK
4. Press the P+ button on your remote until you find the GOD CHANNEL
