Can anyone do a PCB for me?

[Spacerat]

Need small PCB with MAX232 and some connectors. With SMD assembly.
Anyone in CPT Northern Subs?

 

[SBSP]

I googled and found some places that will make you a PCB. Are you planning on visiting the place ? Most of them take online orders ?

If you don't mind me asking. What do you need it for ? and is it not something you can just buy.

I.E I normally use this.
FT232 USB UART Board
https://www.robotics.org.za/ft232-u...itch-micro-usb-connector-w11324?search=Serial it will set you back a whole R98.00 And if you want lots you will get them for probably half the price on ali express. hard to beat when building it your self.

If its just a once of use to program something you can imprevise using a spare Arduino UNO board if you have one., you can just take out the chip , and then you have a serial on pins 1 and 0

 

[CamiKaze]

Sorry for hijack but where can I solder a Sata and power connector back onto the SATA drive's PCB in Cape Town?

 

[Ninji]

Sorry for hijack but where can I solder a Sata and power connector back onto the SATA drive's PCB in Cape Town?

Why but that's an easy job- and I am in Cape Town too

 

[CamiKaze]

Why but that's an easy job- and I am in Cape Town too

I can't solder. Where in CPT?

 

[Ninji]

I can't solder. Where in CPT?

Burgundy Estate

 

[CamiKaze]

Not too far. Will send a pic in PM when I get home.

Oh, thought it was near to Kraaifontein, I see it is near to Table View.
I live in Wellington.

 

[ponder]

Oh, thought it was near to Kraaifontein, I see it is near to Table View.
I live in Wellington.

Get hold of a student in stellebosch or try a local cellphone repair place.

 

[Spacerat]

I googled and found some places that will make you a PCB. Are you planning on visiting the place ? Most of them take online orders ?

If you don't mind me asking. What do you need it for ? and is it not something you can just buy.

I.E I normally use this.
FT232 USB UART Board
https://www.robotics.org.za/ft232-u...itch-micro-usb-connector-w11324?search=Serial it will set you back a whole R98.00 And if you want lots you will get them for probably half the price on ali express. hard to beat when building it your self.

If its just a once of use to program something you can imprevise using a spare Arduino UNO board if you have one., you can just take out the chip , and then you have a serial on pins 1 and 0

Its actually to take a NodeMCU board and add a few LEDs and serial port DB9 connector.

 

[xera]

Its actually to take a NodeMCU board and add a few LEDs and serial port DB9 connector.

Those boards are flippen awesome.

 

[azbob]

Its actually to take a NodeMCU board and add a few LEDs and serial port DB9 connector.

You mean you want someone to layout a pcb for you or manufacture one?

 

[SBSP]

If you are going to let someone do the design work, It might cost you. Have you already built a prototype ?
Creating one wont cost you much.

Simply draw the circuit on a piece of copper clad using a kokie and drop it into some enchant. (ferric chloride *spelling*)
If you cant find feric chloride , mix some Hydrogen peroxide with pool acid. (Google to get the correct ratio)

 

[Spacerat]

If you are going to let someone do the design work, It might cost you. Have you already built a prototype ?
Creating one wont cost you much.

Simply draw the circuit on a piece of copper clad using a kokie and drop it into some enchant. (ferric chloride *spelling*)
If you cant find feric chloride , mix some Hydrogen peroxide with pool acid. (Google to get the correct ratio)

I used to do my own PCBs many moons ago, but dont have time now.Focusing at solutions level instead. The end product is a commercil product so has to be properly done. Prototype is breadboarded