CCTV

[CamiKaze]

I'm battling to view my Panasonic nvr remotely on a smartphone app. Cameras all work fine and I can view it on my wifi but not remotely. I've tried all the YouTube tutorials on router setup but still not working....

Any advice what I can do to get it working? Thanks

Any static IP's set for the cameras?

 

[supersunbird]

Type of internet connection?

 

[Mfza]

Model?

panasonic k-nl308k/g nvr

 

[Mfza]

Any static IP's set for the cameras?

I've set up a ddns.net account

 

[Mfza]

Type of internet connection?

Fibre cool ideas 200/200mbs

 

[supersunbird]

Fibre cool ideas 200/200mbs

Well, then it's not upload speeds like I had when I had ADSL lol

 

[bdt]

I've set up a ddns.net account

And the port forwarding in your router?

 

[CTBP]

https://www.takealot.com/ezviz-husky-air-1080p-full-hd-outdoor-wifi-ip-camera-2-8mm/PLID51983010

Any opinions on this camera? I only have my front entrance and side gate to worry about so 1 camera will be enough to cover it, mainly for night time or when I am away for a weekend, otherwise I work from home mostly.

 

[Neuk_]

I added another camera to my home CCTv setup yesterday which consists of the following

1 x HIKVision DS-7616NI-K2/16P NVR
2 x HIKVision SE-DS-2CD2055FWD-I Cameras (4mm fixed length)
2 x HIKVision SE-DS-2CD2055FWD-I Cameras (2.8mm fixed length) (Only one installed at the moment)
1 x WD 4TB 3.5" SATA3 6.0Gbps Surveillance HDD - Purple
Linkbasic Shielded UV Protected Cat5e Cable

I added the 2.8mm SE-DS-2CD2055FWD-I this last Saturday after running all the CAT5E cabling from inside our roof to outside. The NVR picked the camera up easily but I do need to use SADP to change it's username and password from the standard. I have been able to add the camera to Live View on an iPad and three separate iPhones, but keep getting a "No more IP cameras allowed" error when trying to add it to the Live View of the output of the NVR. All the Googling I have done points to issues when adding camera's using a PoE switch or not directly connected to the NVR, but all my Camera's are directly connected to my NVR.

Has anyone experienced this before?

 

[Neuk_]

I figured it out earlier, instead of adding the new camera to the Live View in the Configuration > Live View of the NVR I was trying to add it directly on the Live View, if that makes sense. Once I figured that out it was easy to add it to the Live View setup of both the VGA and HDMI output of the NVR.