D-Link ADSL issues on Telkom 2Mb lines

[DLinkSA]

Dear All,

Just to keep you informed on the D-Link ADSL Telkom line issue.
We are currently working on the problem, the DSL-504G and DSL-300G has been submitted to Telkom to be tested on there DSLAMS, and I'm going into the Telkom Test Labs my self on Tuesday 9 Dec 2003 to do some tests myself on the Telkom DSLAMS with the D-Link ADSL units.

The DSL-300G according to my knowledge should have no problem what so ever to sync and connect, as well as the DSL-200I and DSL-604+G units.

The only problem we have is with the DSL-500G/504G routers that sync only one certain lines. They do sync on the 2Mb line, I have tested that myself personally. The whole sync thing has to do with the line quality as well as the Noise/Signal ratio.

Please visit this page dialy, I will inform you personally on the progress on this matter.

As you all know the DSL-300G/504G is both ICASA aproved.

When a units is not syncing the ADSL leds flashes the whole time, if your ADSL Leds does not come on, the there is a physical fault on the line or your account has accidently been deactivated. Please feel free to email me with any questions or problems.

<b>Please also mail me so that I can mail you the Firmware Patch to solve this problems, when you run a DSL-500G/504G ADSL router.

I just want to stress, that the DSL-300G/604+G both work on the lines, I have tested them on good as well as poor lines. The only issue is with the 500 series.</b>

Please mail me @: [email protected]


Best Regards,
Herman Janse van Vuuren
Tech Support
D-Link South Africa

 

[kaspaas]

Hi,

a single posting should be fine - at last count you copied this post 4x - 3x too many.



South Africa needs World Class Broadband at World Competitive Prices.

 

[rpm]

Hi DLinkSA

Thanks for the information…we appreciate it. A single posting in the announcements forum should be adequate to inform members about the problem. I therefore deleted some of the postings in other forums.

Regards,

RPM
[email protected]

 

[marshall]

Hi DlinkSA


Fitst of all - thanks for a great router!
Telnet interface is a bonus in my books.

Anyway - my workaround for the 2MB sync on 504G:
telnet to the dlink router:

modify dsl config glite
commit
reboot

Another problem that I have is setting up NAT RDR remotely.
Works fine from LAN port but remotely it buffer overflows the poor CLI - any tips?