DDR3 Kingstong HyperX

[qu1k_sh0t]

I am able to pick up this little set, KHX11000D3K2/4G, 2 x 2gig DDR3 1375 Kingston HyperX memory.

The price is pretty good, but I wanted to know if anyone has any experience with this ram? Or any similar HyperX ram from Kingston? The ram is also rated at cl7 which is pretty hot for DDR3 memory.

 

[CodeMaster]

Used a whole lot of Kingston 2x1GB HyperX DDR2800 RAM in 4 PC's at work, no complaints. It works

 

[ADRAM3L3CH]

The hyper x range is pretty good. Have a set of DDR2 in my pc, lower latency speeds things up a bit .

 

[TheRift]

Can't go wrong with Kingston. Until, ofcourse, you do.

 

[howardb]

I've been using Kingston for about 10 years now and no issues - currently running DDR2 800 Hyper-X

 

[TheRift]

I also have Kingston HyperX old DDR in my machine and, although horrible for overclock in this specific DDR, it runs solidly. Except ofcourse for the flapping PSU voltages which mess things up a bit now and again.

 

[psc]

The ram is also rated at cl7 which is pretty hot for DDR3 memory.

@ what voltage ?

 

[qu1k_sh0t]

@ what voltage ?

I stand to be corrected but the ram will have those timings at 1.7 volts. At the stand 1.5 they run at 1066 as opposed to the 1375mhz. So a small bump should get them going in the right direction. But even at 1066, R750 for 2x2gig modules is a good price

 

[TheRift]

R750!?!?!? Damn!

Hang on, I see these listed at Frontosa with CL9 and 1.6V.
The KHX11000D3LLK2/4G is listed with CL7 and 1.7V.

 

[qu1k_sh0t]

R750!?!?!? Damn!

Hang on, I see these listed at Frontosa with CL9 and 1.6V.
The KHX11000D3LLK2/4G is listed with CL7 and 1.7V.

Hmmm I will have to double check all my model numbers, long story short Contacts FTW Haha, even at CL9 for the price they still awesome.

Just gotta confirm the model numbers, will report back once I have them.