Dictator management system

[Janito101]

Can one install a Dictator management system on an Opel Corsa D 2010 model?is it advisable to do so?

 

[Gtx Gaming]

no probably not, what engine is under the bonnet?

 

[CT_Biker]

Not a good idea.

 

[thehuman]

Also supply the area you stay in , it would need to be setup on a dyno to be 100% tho.

 

[CT_Biker]

Also supply the area you stay in , it would need to be setup on a dyno to be 100% tho.

And the ODB2 system, CAN, Gauge cluster etc etc. Who is going to connect all of that to the Dictator which has like 4 GPIO's and no interface for CAN or OBD2.

The damn thing still uses an RS232 serial bus. It was a hunk of crap when I was a kid and its still **** now.

 

[unobeat]

Why is there a need to change the OEM ECU?

 

[Crowley]

A few monster stickers would add better performance.

 

[TPants]

I thought Dictators only used Rolls and Benz's, not sure they can be managed though unless married.

 

[ArmatageShanks]

Yes you can, in the same way that you can install a Spitronics system or Gotech. However if the manufacturer does not have presets for your engine you'll spend days at the dyno depending on the tuner.

Dicktator systems are for modified engines where standalone management is needed, think race cars and the like.

Haltech ECU's most comprehensive systems available with the largest range of engines supported, there are very very few motors which aren't, they are endlessly supported and customisable, they don;t come cheap though.

 

[ArcticFox]

Ok I've got a question I'm new to DIY projects I'm looking for a standalone ecu for a ej20 engine I wanna put it in beach buggy any recommendations I'd appreciate it

 

[ChuckMeFarley]

Ok I've got a question I'm new to DIY projects I'm looking for a standalone ecu for a ej20 engine I wanna put it in beach buggy any recommendations I'd appreciate it

Speeduino?

 

[nismo31]

Good day gents,ok om new here and im stil learning the site. ..but i have a important question to ask about my nissan sabre 200 GXI.
I have the import moror the SR20 neo vvl motor with coil pack and crank sensor and im running 60-2 dictator,so my neo vvl motor have v-tec solinoids that advances cam timing and increases valve clearance for extra performance,but.....ive relized only one solinoid was activating wich was the exaust solinoid,then some guys said i must have a 4 pin relay between management and solinoids in order for both solinoids to kick in,and since ive put a relay and wired it according to a diagram no solinoids kicks in anymore intil now

 

[Jan van Riebeeckstad]

The only dicktaker I know is @epah

 

[muisnes]

The only dicktaker I know is @epah

So this should be installed in the tailpipe of any 320d I see?

 

[Superjakes]