DLink 2750U 3G failover - not detecting modem

[danejc]

Greetings all,

I have a DLink 2750U with the USB failover. I trying to setup my 3G card to fail over however I am able to login to the web console and see the settings but the device does not pick up my 3g modem. I though of manually installing the drivers however I cannot find a site where i can download drivers from in the format that the DLINK router can see. Everywhere, including the manufactures site, has it in an EXE format which really flashes the 3G modem. I have two modems 1X mf190 and the other is k4201-z.

Can anyone suggest a site I can use or perhaps something I am doing wrong??

 

[JoE]

I have the same problem. Any help would suffice.

 

[ginggs]

I have two modems 1X mf190 and the other is k4201-z.

Both of those are ZTE modems.
Try one made by Huawei.

 

[JoE]

Both of those are ZTE modems.
Try one made by Huawei.

Thanks bud. Borrowed a Huawei one and it worked perfectly.

 

[Rouxenator]

I got a DSL-2750U Telkom hardware version T1 for cheap cause the DSL circuitry is dead. Upgraded to firmware AF_1.76_R01 and I have no joy with a Vodafone ZTE K4201-Z USB modem. There is a Huawei E3531 HSPA+ 21.6Mbps USB 3G Dongle on it's way from Takealot and I hope this D-Link will take full advantage of it.

 

[Cyfershepard]

I got a DSL-2750U Telkom hardware version T1 for cheap cause the DSL circuitry is dead. Upgraded to firmware AF_1.76_R01 and I have no joy with a Vodafone ZTE K4201-Z USB modem. There is a Huawei E3531 HSPA+ 21.6Mbps USB 3G Dongle on it's way from Takealot and I hope this D-Link will take full advantage of it.

I have the same firmware and router, but it keeps cycling from switching to dialing to no USB card detected and then it repeats. Any idea why?

 

[Sarel0092]

D-Link have a list of compatible 3G/LTE dongles:
Compatible 3G/LTE dongles - DSL-2750U H/W: T1