Help !! Unifi UAP LR

[Mzezman]

Im on a 500mb line fibre

From the screenshots you were connected on the 2.4 band so you wouldn't get near the 500Mbps line speed, maybe on 5ghz band you can get close

 

[marine1]

From the screenshots you were connected on the 2.4 band so you wouldn't get near the 500Mbps line speed, maybe on 5ghz band you can get close

Same thing

 

[Mzezman]

Same thing


View attachment 1883859

Thats odd - the PHY Speed, Channel width and Signal strength looks fine so you SHOULD be able to get between 350 and 450Mbps

 

[Soul Assassin]

It looks like something along the chain is not negotiating at the right speed or something.

 

[Mzezman]

Thats odd - the PHY Speed, Channel width and Signal strength looks fine so you SHOULD be able to get between 350 and 450Mbps

For comparison - here are my readings from (similar) stats

 

[marine1]

It looks like something along the chain is not negotiating at the right speed or something.

But then surely it wouldn't negotiate at GBE?

 

[marine1]

I see that all the AP's are at WIFI 4, the list of APs are:
3 x AC LR
1 x U7 Lite
Why would the U7 Lite still be saying wifi 4?

 

[Mzezman]

I’m trying to remember your other network settings- do you have meshing enabled perhaps?

 

[marine1]

I’m trying to remember your other network settings- do you have meshing enabled perhaps?

I think i connected on wifi 6 now I have to figure out why the speedtest is so bad. Yes I think meshing is enabled

 

[Mzezman]

I think i connected on wifi 6 now I have to figure out why the speedtest is so bad. Yes I think meshing is enabled

Is it possible you have some speed limits / QOS settings on the network / wifi?

 

[marine1]

Is it possible you have some speed limits / QOS settings on the network / wifi?

I need to check the router its the only place thay could be happening unless the cabling is suspect. But if I connect via cable I get full 500mb so I doubt its the router. There are 2 switched both unmanaged so will try connect wired to both and see if maybe there is an issue there

 

[yogidabear]

I see that all the AP's are at WIFI 4, the list of APs are:
3 x AC LR
1 x U7 Lite
Why would the U7 Lite still be saying wifi 4?



View attachment 1883936

Looks like your new ap is uplinking on the old wifi4 mesh not cable. It can happen even when you are powered by poe from a switch if there is an issue with the cabling, or from the switch through an injector. In some weird cases having to forget and readopt is necessary. What does unifi say is the uplink?

That would explain your poor speed. Why is your shiny new ap in the garage or is that where you serve the most wireless from? My oldest ap is in the garage

 

[SauRoNZA]

Looks like your new ap is uplinking on the old wifi4 mesh not cable. It can happen even when you are powered by poe from a switch if there is an issue with the cabling, or from the switch through an injector. In some weird cases having to forget and readopt is necessary. What does unifi say is the uplink?

That would explain your poor speed. Why is your shiny new ap in the garage or is that where you serve the most wireless from? My oldest ap is in the garage

Exactly why I turn that functionality off if I have no intention of using it.

 

[marine1]

Figured it out, the Switch was on VLAN, can you believe it, this after running a brand new Cat6a Cable - you dont even want to know.......

 

[Soul Assassin]

Figured it out, the Switch was on VLAN, can you believe it, this after running a brand new Cat6a Cable - you dont even want to know.......

What does your speed test look like now?

 

[marine1]

What does your speed test look like now?

It was around 450mb

What does your speed test look like now?