Jet Air Aircon WiFi

[Mzezman]

I have downloaded it but not tried it yet.

Ive found it easier to work with for Tuya based devices

 

[Neuk_]

Ive found it easier to work with for Tuya based devices

I tried quickly a bit earlier before I left to go to the shops, I got nowhere quickly so will have to do some more research.

 

[Mzezman]

I tried quickly a bit earlier before I left to go to the shops, I got nowhere quickly so will have to do some more research.

Cool, shout if you need help later

 

[williamdi]

Anyone have any advice on how I can get my aircon linked into the Tuya app? (Want to ultimately integrate into Home Assistant). The JASA app picks up my aircon no problem, however the Tuya app just doesn't discover the device.

 

[Mzezman]

Anyone have any advice on how I can get my aircon linked into the Tuya app? (Want to ultimately integrate into Home Assistant). The JASA app picks up my aircon no problem, however the Tuya app just doesn't discover the device.

I haven't used the Tuya app but i use the Smart Life app which is just another version of Tuya. I find it easier to work with. Get the aircon into pairing mode (health button 7 times i think) then in Smart Life you just connect it as a wifi aircon

 

[neoprema]

Is anybody running a Jet Air AC unit and managed to get it connected to their WiFi and the Jet Air or JASA application? We had a JASA-H12A4/QCI installed yesterday, remote has the WiFi button, manual says WiFi may not walk on all devices, I can't get it to work...

It needs the module. Did you buy the module?

Mine has the remote function and LED indicators etc but the installer said you had to add the module.

 

[Neuk_]

It needs the module. Did you buy the module?

Mine has the remote function and LED indicators etc but the installer said you had to add the module.

Nope, never got around to it, do you know where it is available from?

 

[neoprema]

Nope, never got around to it, do you know where it is available from?

no i'll try to find out.

I didn't either as its only the one in my bedroom and i just turn it on the same settings when i get into bed and off when i get out. If I had it somewhere more used like the living room etc i would be more pushed to use it over wifi heh

 

[blowdart18]

I have just had the Jet Air Q Plus 24000BTU installed. Struggled for hours with the JASA app and trying to figure out how to get the aircon into pairing mode. Eventually I found that using this app, link below, from Jet Air instead of the JASA app worked seamlessly. As long as you have the WiFi enabled on the aircon (symbol will be displayed on remote) the app automatically detects the aircon, no need for pairing mode:

https://active.clewm.net/ENqndy?qrurl=http://qr05.cn/ENqndy>ype=1&key=c82b4173a489ff539366621546cb7b89da2cbc7901

Can definately confirm this worked like a charm!!

 

[Neuk_]

no i'll try to find out.

I didn't either as its only the one in my bedroom and i just turn it on the same settings when i get into bed and off when i get out. If I had it somewhere more used like the living room etc i would be more pushed to use it over wifi heh

Similar story for us, although I want to get HA up and running again and then manage large loads like geysers, aircons, pool, etc. when grid supply goes down.