PC13 Automatic Pressure Pump Controler

[Maryna546]

I baught this water pressure controller.
Specs are 1.5-3bar cut in, with 10 bar maximum.

Does this mean it is pre set to cut off at 10 bar only? Or is it pre set 3 bar?

We are arguing in the house about this and I want ro know who is right?

 

[soulie]

3 bar ,10 bar is maximum pressure ,it will stop anywhere between say 3 to 6 bar .usually anyway .

 

[Supervan II]

it will ,should cut out at 3 bar ,45psi ,thats a standard pressure ,usually 3.5 bar then it will stabilise at around 3bar,10 bar is a bit hectic for your home especially the geyser .

AFAICR, the pre-set cut-off pressure is 3 Bar, but can be adjusted upwards if required.

 

[soulie]

AFAICR, the pre-set cut-off pressure is 3 Bar, but can be adjusted upwards if required.

ja ,some are settable most are fairly low ,but have seen some spike at 6 bar then drop ,never tried to set the switch off pressure myself .