Please help Cisco 1841

[hennievr]

I have two Cisco 1841 routers connected on 64k diginet lines point to point to that will be connected to the the a switchboard. I configured it so that the two routers can ping each other through hyperterminal, but when I try to ping from windows there is no way. I also cannot telnet remotely into the remote router. They both have WIC-1-T serial cards. I configured ip nat on both routers, but still cannot ping from windows machines.

Does anyone have a simple configfor me. It does not need to have internet connection, that I run on adsl already.

Any help will be greatly appreciated!

 

[Roman4604]

I configured ip nat on both routers

You don't need NAT, best to remove it.

The routers just need to inform each other of their remote LANs. Easiest way to accomplish this is ...

router rip
version 2
network 0.0.0.0

 

[savage]

Given what you said, I'd say you configured the serial interfaces, but not the Ethernet interfaces...

LAN 1 <- RTR Ethernet IP <- RTR Serial | RTR Serial -> RTR Ethernet IP -> LAN 2

Not sure if that makes sense, but you need IP addresses on your Eternet as well as Serial interfaces, more so on your Eternet than your Serial AFAIK