PSU problems - missing cables

[Jojo Tank]

Hi, I bought a Super flower Leadex 750w PSU to replace a faulty Corsair. I misplaced the 8pin PCIE cables for the Leadex and it seems that the Corsair Type 4 cables do not fit. I even bought extra Thermaltake PCIE 8pin cables and they also don't fit.

 

[bixt]

Laarney PSUs

If you cant find replacement cables for the life of you, then open it up and direct solder the other PCIe cables in, cutting of the conmectors. Absolute last resort of course.

 

[Gnome]

Laarney PSUs

If you cant find replacement cables for the life of you, then open it up and direct solder the other PCIe cables in, cutting of the conmectors. Absolute last resort of course.

Yeah... Or maybe just actually buy the connectors and make your own cable ¯\_(ツ)_/¯
IIRC those are Molex Microfit connectors.

 

[Zuner]

I would not randomly connect other cables to any other PSU without first confirming the pinouts. just cause a connector fits doesn't mean the pinout will be the same.

 

[CheddarByte]

Have you fired a mail off to wootware to ask if they can source any?

You should never attempt to use another PSUs modular cables, even from the same manufacturer because you never know what stupid layout is configured on the PCB backplane.

 

[ponder]

The Corsair pinouts are not the same, there is no set standard between manufacturers. I do know "some" evga PSU pinouts are the same as SF are the OEM.

 

[ArmatageShanks]

Laarney PSUs

If you cant find replacement cables for the life of you, then open it up and direct solder the other PCIe cables in, cutting of the conmectors. Absolute last resort of course.

Waar kom jy vendaan

Round 1mm ID ligs, bunch of cable from the drawer somewhere, crimp and away you go