Rage Ati and AMD issues

WOOOHOOOOO its working

Did the following
Stonecold that string u gave didnt work hey

=> And before you do anything uninstall your old drivers.

=> Reboot your system when prompted!

=> Use Driver Sweeper. Found here, official site: http://phyxion.net/Driver-Sweeper/Dr...Version-3-2-0/ and clean ATI display or NVIDIA display drivers!

=>Reboot and than install latest drivers i gave you link below!

1] First Step are teh drivers => http://downloads.guru3d.com/Catalyst...load-2795.html

=> And i got my drivers from the AMD website

2] Second step is to create rageconfig.cfg file inside RAGE/base folder.

3] Third step put this data i used for my config!

vt_pageimagesizeuniquediffuseonly2 8192
vt_pageimagesizeuniquediffuseonly 8192
vt_pageimagesizeunique 8192
vt_pageimagesizevmtr 8192
vt_restart
vt_maxaniso 4
image_anisotropy 4
vt_maxPPF 64 //I recommend 64 or 128 value!
fs_cachepath "C:\Users\AlenK\AppData\Local\id software\rage"
cvaradd g_fov 20 //or 25 for the rage is the best value, this value is the field of view!
fc_maxcachememoryMB 1024 // Here you set how much memory you video card has!
ik_enablesmoothing 0
image_usecompression 0
jobs_numthreads 4 // this value depends on how many physical core you have in your procesor!
mem_phymemblocksizem 512

4] Final step

Copy this settings i used for my launch shortcut!

+r_swapInterval 1 +vt_maxPPF 64 +vt_pageImageSizeUnique 8192 +vt_pageImageSizeUniqueDiffuseOnly 8192 +vt_pageImageSizeUniqueDiffuseOnly2 8192 +m_smooth 0


ENJOY okes
 
Next issue at hand :P
Screen tearing games plays awesome but i get these tears on the left hand side
When i have a solution ill post it
 
Just need to get this off my chest quickly:

Shame on you ID Software for letting this game carry your name.
Atleast I noticed ID doesn't list it as one of their main games on http://www.idsoftware.com/games/quake/ if you mouse-over "ID Games"

Too bad, I was looking forward to playing this game but there's simply too many glitches, artifacts and other issues even after the 1Gb patch.

Battlefield Beta will have to do until release.
 
Spent 5 hours last night trying to get this working

No matter which config I tried, which CCC settings, Cata AI on/off or which driver (removed all drivers about 4 times in total - tried 11.5 - 11.10 and both Rage performance drivers) I either ended up with the 1-3sec freezing or the entire map covered in flickering black squares
 
Fortunately my game has not had any problems 'working'. The problem I do have is artifacts and screen flicker. On some menu's it flickers so quickly, I can be glad I'm not epileptic..... Bar that, I'm enjoying it :)
 
Oculate said:
Spent 5 hours last night trying to get this working

No matter which config I tried, which CCC settings, Cata AI on/off or which driver (removed all drivers about 4 times in total - tried 11.5 - 11.10 and both Rage performance drivers) I either ended up with the 1-3sec freezing or the entire map covered in flickering black squares
Click to expand...

I checked yesterday the cfg makes a mayor difference try one of these 3 see which one works for u

_____________________________________________________________________
ULtra
________________________________________________________________

//HD Config v2.0 By FusedCore
echo "^1 Loading the HD Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024"; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "16"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "1"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
//Begin HD Settings
echo "^1 -Loading the HD Settings..."
seta vt_qualityhdplossless "1"
seta vt_qualityhdppower "1"
seta vt_qualityhdpspecular "1"
seta vt_qualityhdpnormal "0"
seta vt_qualityhdpdiffuse "1"
seta vt_qualitydctpower "100"
seta vt_qualitydctspecular "100"
seta vt_qualitydctnormal "100"
seta vt_qualitydctchroma "100"
seta vt_qualitydctluma "100"
seta vt_maxlockedpages "2048"
//HD Image settings
seta image_qualityhdplossless "1"
seta image_qualityhdppower "1"
seta image_qualityhdpspecular "1"
seta image_qualityhdpnormal "0"
seta image_qualityhdpdiffuse "1"
seta image_qualitydctpower "100"
seta image_qualitydctspecular "100"
seta image_qualitydctnormal "100"
seta image_qualitydctchroma "100"
seta image_qualitydctluma "100"
seta image_maxlockedpages "1024"
//End HD Settings
echo "^1 -HD Settings Loaded..."
//seta vt_maxaniso 4; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...HD Config v2.0 by FusedCore Loaded, Enjoy the game!!!"
 
___________________________________________________________________
High End
_________________________________________________________________

//High-end Config v2.0 By FusedCore
echo "^1 Loading the High-end Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024" ; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "16"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "2"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
seta vt_maxaniso 4; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...High-end Config v2.0 by FusedCore Loaded, Enjoy the game!!!"
 
________________________________________________________________________
Mid
_____________________________________________________

//Mid-end Config By FusedCore
echo "^1 Loading the Mid-end Config v2.0 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024" ; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "8"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "2"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "16"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
seta vt_maxaniso 2; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...Mid-end Config v2.0 by FusedCore Loaded, Enjoy the game!!!"

____________________________________________________________

See if those work

Phreeme u lucky hey im having these tears now and then on the left
 
Phreeme u lucky hey im having these tears now and then on the left
Click to expand...

Thanks bud.... it seems so....
If it helps, my specs are in my sig and I'm running Win 7 Home Premium x64. I've got the 11.9 Cat drivers installed...
 
Well. How is the game gfx issues aside? Can u play borderlands style co op?
 
The game itself is great. It's funny, I told my brother Rage was like a 'realistic' Borderlands. You can arb around and find places to go and I've done a few "sidequests" which have been fun. There are wager games (a Magic card type game, a luck of the dice game and one where you dot a knife between your fingers <-- like in the old westerns). There is a Co-op option but I've always been one to play solo.

The beginning is fairly slow, but overall I'm enjoying it.
 
Im loving the game.
I had issues with tearing and texture popping right at the start. My game also crashed on some loading screens.

However, after the patch that was released on sunday morning i havent had a single issue.
If you go to video settings and enable vsync and change the texture cache to large it removes the texture popping and tearing.
Now it runs like a dream and im having a blast.
 
RoCkFoRdGuN said:
<various config settings>
Click to expand...

Tried all of those last night - spent 3 hours in FusedCore's thread

As previously mentioned I either run the config file and I can't see textures or without it and it freezes every couple seconds

I'll be playing with my CCC settings this evening after getting the patch
 
I'm battling too. I have a HD6850 and phenom x6 1100t. The graphics looks awesome but it seems a bit choppy like and not to mention the like flashing on the side of the screen when looking around. It also looks like it takes a while to load the graphics like. Hmmm.
 
Had issues like everyone else. After using Drive Sweeper, new drivers, disabling Catalyst AI ( stops those annoying freezes every 3 secs or so), creating a cache folder and patching it to the latest version it now runs brilliantly. ATI 5870 btw.

Also want to add that I am severely disappointed with ID for releasing it like it is. Blah-blah, point fingers at ATI and Nvidia... ID is to blame for this. No gamer should have to go through this much frustration to get a new title running.

It does look much better after the patch + custom cfg than I run, but let's hope they release a proper texture pack for it.

Anyhoo, must admit that I'm rather enjoying it now that it runs! :)
 
Oculate said:
Spent 5 hours last night trying to get this working

No matter which config I tried, which CCC settings, Cata AI on/off or which driver (removed all drivers about 4 times in total - tried 11.5 - 11.10 and both Rage performance drivers) I either ended up with the 1-3sec freezing or the entire map covered in flickering black squares
Click to expand...

Exactly that.

Tried countless of the suggested "guides" on the official Rage forum, following instructions to a T.
No Dice.

Funny thing is, pre-patch and driver molestation / configs / CCC adjustments the game didn't crash, it ran smooth with only some black blocks appearing at random.

After patch and changes it keeps crashing catastrophically.
Bizarrely when I tried it again earlier with one of the configs posted here it crashed so bad that my primary monitor went on standby, leaving me with only my background on my 2nd display.

Couldn't recover and eventually had to reboot.
Pretty crazy.

Edit: My PC runs every other game out there without a moment of hassle. Rock solid platform.
 
FOOOOOK THIS i cannot get rid of this tearing it runs nice but i have screen tearing im gonna wait for the other update. ID is money hungry thats all. Conack i read somewhere that if u have multiple monitors it may cause problems. But i am waving the white flag now BF3 is coming aswell lets hope it wont be such a problem
 
RoCkFoRdGuN said:
FOOOOOK THIS i cannot get rid of this tearing it runs nice but i have screen tearing im gonna wait for the other update. ID is money hungry thats all. Conack i read somewhere that if u have multiple monitors it may cause problems. But i am waving the white flag now BF3 is coming aswell lets hope it wont be such a problem
Click to expand...

I've given up on Rage

A friend mentioned how short the game is (nowhere near the 25gb installation size to justify such a short game)
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X