Lupus
Honorary Master
- Joined
- Apr 25, 2006
- Messages
- 91,510
- Reaction score
- 62,101
So i can't be in CPTNo, any install. Its illegal to use an axpert in cape town because reasons.
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
So i can't be in CPTNo, any install. Its illegal to use an axpert in cape town because reasons.
I thought the regulations they refer to govern grid interconnection?No, any install. Its illegal to use an axpert in cape town because reasons.
From the mybb articles I've read and the forum posts it sounds like they treat even a shitty off grid inverter as "connected to the grid" because the AC goes into the input.I thought the regulations they refer to govern grid interconnection?
It's a little nonsensical - it would be an interesting article to get a definitive opinion from a hardcore sparky.From the mybb articles I've read and the forum posts it sounds like they treat even a shitty off grid inverter as "connected to the grid" because the AC goes into the input.
Funny enough, they are okay with gennies plugged into the grid.
They are just dumb and it should be ignored. Power to the people!
Very nonsensical. Try explain it to a politician though.It's a little nonsensical - it would be an interesting article to get a definitive opinion from a hardcore sparky.
My opinion is just go offgrid and be done with them.Very nonsensical. Try explain it to a politician though.
and to think we vote for this ****.
Or Municipal -> Battery Charger. No inverter connected to grid.
You'll have to lie the panels on the grass or just do it right and ignore the nonsense behaviour.Or Municipal -> Battery Charger. No inverter connected to grid.
I have 2 geysers running on 5.4KW PV (on smart load)New prepaid meter was R1500. It's in and the problem is sorted. Grid doesn't trip anymore.
Now to start trying to figure out how to go about getting two 150l geysers hot through the day on my 7.7kw pv.
Also have mine on two CBI smart switches, one going on from 10am to 1pm, and the other from 1:30pm to 16:30pm but it's not heating the water enough. Not sure why.I have 2 geysers running on 5.4KW PV (on smart load)
geyserwise smart set them to go on from about 10AM to 1PM if they drop below a certain temp but set a few IFTTT rule to not allow them to come on at the same time (although I have tested the inverter it can run both)
Might be the thermostat is faulty or set lowAlso have mine on two CBI smart switches, one going on from 10am to 1pm, and the other from 1:30pm to 16:30pm but it's not heating the water enough. Not sure why.
Check the thermostat temp setting?Also have mine on two CBI smart switches, one going on from 10am to 1pm, and the other from 1:30pm to 16:30pm but it's not heating the water enough. Not sure why.
It is just a axpert clone. It is unable to meet the standards of NRS 097It's been fine for the 2 years I've had it. Had a few bugs where it disconnects the pv when it has a certain voltage.
No such rule here in JHB
Will have a look at the thermostat settings. Thanks.Check the thermostat temp setting?