Solar setup and redundancy

NR7

Expert Member
Joined
May 27, 2011
Messages
3,590
Reaction score
3,879
Location
East Rand, JHB
Was just thinking about parts failures and how to avoid the whole system going down.

My last quote was on a 8kw Deye with 4x5kwh Deye batteries and 12 Tier 1 panels.

But I'm thinking if it wouldn't be better going for something like
2 x 5kw Deye inverters, each with 2 x 5kwh Deye batteries and with 6 panels on each system

My thinking is that if one battery goes down, or even one on each system, the whole setup can still keep running (although better battery management overnight or leaning on grid power would be needed).

And if one inverter goes down, there will still be solar power in half the house on power and it's easy enough to shift some essentials onto that half through heavy duty extensions etc.



And if one cannot afford to replace the inverter right away, I imagine the remaining panels can be disconnected and put onto the second MPPT of the only working inverter fairly easily?

If the inverter is down I imagine it's not that easy to get the connected stuff back onto grid power exclusively as I'm under the impression that the Eskom bypass switch just cuts the solar and directs Eskom power to the inverter (which in this scenario isn't working)?


What do you guys think? Or would such a setup cause more problems in the future?
 
Was just thinking about parts failures and how to avoid the whole system going down.

My last quote was on a 8kw Deye with 4x5kwh Deye batteries and 12 Tier 1 panels.

But I'm thinking if it wouldn't be better going for something like
2 x 5kw Deye inverters, each with 2 x 5kwh Deye batteries and with 6 panels on each system

My thinking is that if one battery goes down, or even one on each system, the whole setup can still keep running (although better battery management overnight or leaning on grid power would be needed).

And if one inverter goes down, there will still be solar power in half the house on power and it's easy enough to shift some essentials onto that half through heavy duty extensions etc.



And if one cannot afford to replace the inverter right away, I imagine the remaining panels can be disconnected and put onto the second MPPT of the only working inverter fairly easily?

If the inverter is down I imagine it's not that easy to get the connected stuff back onto grid power exclusively as I'm under the impression that the Eskom bypass switch just cuts the solar and directs Eskom power to the inverter (which in this scenario isn't working)?


What do you guys think? Or would such a setup cause more problems in the future?
Nope you have a breaker that you can flip to inverter, off or back to grid. If your inverter goes down, you just turn everything off and flick back to Eskom via the breaker.
 
You will lose half your battery capacity if one inverter goes down. Rather parallel the batteries, and connect to both inverters.
They Deye manual shows how to do this.
I prefer the 8KW inverter - 5KW is too close to most use-case limits, especially if you have a geyser on it.

Definitely recommend a changeover switch.

There is a very recent Deye that has 3x MPPT's in it, whereas the previous two had just 2x MPPT's. Depending on your solar setup or roof layout, you may prefer one over the other.
 
Top
Sign up to the MyBroadband newsletter
X