Watercooling

Dual pump setups are reserved for high restriction loops (dual/triple GPU + RAM + CPU + mobo + several rads). Yours (CPU+GPU) is medium to low, so one pump is ample
 
Well another rad isnt that expensive hey. I mean its like 60 dollars...
Not too bad me thinks.

If its better to do it seperatly then I must investagte further. A kit works out a helluva lot cheaper as well :/
 
haha Im working and attending meeting and you okes are going bos here!! lol

:)

Archer, Im gonna get these

Was just wondering what the difference is between them and those compression jobbies. They clamp down as you screw them onto the tube so I assume they safer than those other things with cable ties on

:confused:
 
Last edited:
Well guys.
I chatted to Andy from Landmark earlier.
We have a pretty good understanding etc.
He advised me to go big or go home. He said for now he would recommend an aftermarket aircooler for the 6990 and go from there.
I told him I want to do an upgrade when the new cards come out so he said its a waste to blow cash now. Also he reckons December shipping times are a bit all over the place so if I order * Even on my own * there is not a good chance ill get the stuff until January.

This sucks!
 
My poor pc, this is gonna take flipping ages :(

2903c728-c850-629d.jpg
 
Ok 3 x 140mm fans are in. As well as 2 x 120mm for my rad. Also popped another 120mm on my aide panel blowing onto my gfx.

As for the sleeving.... Oh my this might take an eternity, think I'll skip the main psu power cable and just do the modular ones! ;)

Tomorrow is another day lol :D
 
Haha, told you it takes forever! And even longer to do it properly :p
I remember I would do like 6 or 8 wires on the 24 pin mobo connector, and hen pop it back in so I can play BF3 again. Then next day another 8... etc etc, rinse and repeat with all the other cables
 
Mypro-D said:
Well guys.
I chatted to Andy from Landmark earlier.
We have a pretty good understanding etc.
He advised me to go big or go home. He said for now he would recommend an aftermarket aircooler for the 6990 and go from there.
I told him I want to do an upgrade when the new cards come out so he said its a waste to blow cash now. Also he reckons December shipping times are a bit all over the place so if I order * Even on my own * there is not a good chance ill get the stuff until January.

This sucks!
Click to expand...

Dude gimme until tonight so i can get a pm from mate, he isn't on skype at the moment. We imported plenty water cooling stuff from a site and they shipped it in about 7 days. I will get the web address for you.

I have a 1000/L ph hour pump lying here if you are interest. You can have it for nothing as it's just sitting here. I think i also have a triple rad as well i will look tonight and see what i can find. I am offering so if someone wants it they must just cover shipping.
 
killadoob said:
Dude gimme until tonight so i can get a pm from mate, he isn't on skype at the moment. We imported plenty water cooling stuff from a site and they shipped it in about 7 days. I will get the web address for you.

I have a 1000/L ph hour pump lying here if you are interest. You can have it for nothing as it's just sitting here. I think i also have a triple rad as well i will look tonight and see what i can find. I am offering so if someone wants it they must just cover shipping.
Click to expand...

please can you post the site here as well. I think a lot of people are looking at importing watercooling stuff for Christmas :)

oh and if no one has taken that pump I would take it off your hands ;) I cant fit a triple rad in my case though, so I wont be greedy! :D
 
Last edited:
Its either PPCS (performancepcs) or FrozenCPU, they are the easiest to deal with imo

Anyone looking at building a new rig from scratch?? I just saw a 3x180 rad that would be perfect in a RV02-E. Would build it for myself but ya, my case isnt going anywhere right now :p But I feel like building something dammit :D
 
Archer said:
Its either PPCS (performancepcs) or FrozenCPU, they are the easiest to deal with imo

Anyone looking at building a new rig from scratch?? I just saw a 3x180 rad that would be perfect in a RV02-E. Would build it for myself but ya, my case isnt going anywhere right now :p But I feel like building something dammit :D
Click to expand...

you can come help me with mine! :p

(brb coffee)
 
Right then we need to organize a bulk order then :)

I don't mind doing it all? Might start a new thread in the hardware section so people can place their order.

Thoughts?
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X