Wireless AP bridge question/help.

[RAITHE]

I have a mega105WR and a netgear WG602 AP.

I have been battling, trying to create a wireless bridge between the two to give a pc internet access through the AP instead of running cable.

Iv decided to take a breather and look for help

Has anyone tried something similar who can offer advice?

i have given the router the MAC of the AP and visa versa.
i have made the AP a repeater point.

 

[Quasimodo]

What OS are you running? Does your PC have a wireless card or is it plugged directly into the WG602 AP? Have you set up a wireless network with SSID and channel for both devices? Which device serves as the DHCP server?

 

[Hummercellc]

The mega 105 only allows WDS using WEP 64bits Shared...
No other security method. If you are using WPA there is your problem….
Also the netgear it a B*tch to setup..
Make sure you place the Wireless MAC address of the Mega 105 in the AP list on the netgear.

 

[RAITHE]

@Quasi
Im running XP64
PC is plugged directly into AP - no wireless card Would a Gigabyte GNBR01-G do the trick?
The Mega105WR serves as DHCP.

My initial theory was to connect the AP wireless-ly as a client of the router and plug the pc into the AP LAN1...or am i totally off?