Xtraview smartlnb setup between DSTV HD and Explora

[Earther]

Hi.

Need some help setting up Xtraview between DSTV HD Model 4U and Explora using Smartlnb Model LMX500.

Questions:
To what ports do I connect the decoders to the lnb? ( Both unicable?)

To what ports do I connect the heartbeat cable on the decoders? ( Both rf out?)

Is there any settings on the decoders that needs to be done and what are they?

Xtraview already activated.

Found a lot of advice on the forum but not enough on my exact same setup.

 

[Earther]

Sorted it myself. If anyone needs info just ask.

 

[Zinator_RSA]

Info please..? Looking to do the same, but with the oldie 1131 model and explora as primary, need clarification on the heartbeat part.

 

[The_Ogre]

Info please..? Looking to do the same, but with the oldie 1131 model and explora as primary, need clarification on the heartbeat part.

Either. Just make sure the one you use is the one you chose in the Xtraview settings menu

 

[Zinator_RSA]

Either. Just make sure the one you use is the one you chose in the Xtraview settings menu

Do I need to have a cable connecting the two decoders? And on which ports?

 

[The_Ogre]

Yes, its called a heartbeat cable. Plug it into either of the RF ports on each of the decoders and make sure you change the Xtraview settings to correspond.