4mb Question

[Wackyza]

Hi guys. I'm a mybroadband nuubie.

I got my dsl upgrade yesterday to 4mb. Very happy that it is syncing @ 6mb. I'm using a DuoPlus 300wr (Yes the cheap freebie). As far as I know, I an about 1km away from the exchange. Telkom support and the online checker says my exchange supports 10mb. Now my question is, based on my router stats below, whats preventing me from syncing at 10mb?
I checked the sticky's about line attenuation ect. and judging by mine, it's quite good and that cannot be the deterring factor or can it? What else can it be?

Some insight would be great. Thanks in advance.

Modem Status

Connection Status Connected
Us Rate (Kbps) 640
Ds Rate (Kbps) 6144
US Margin 12
DS Margin 19
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 13
US Line Attenuation 6
Peak Cell Rate 1509 cells per sec
CRC Rx Fast 0
CRC Tx Fast 1
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path
DSL Statistics

Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

 

[Rocket-Boy]

I recon you should phone them and ask them to try bump it up.
Oh and /me gives you the welcoming thumbkin...

 

[PotShot-RSA]

Try changing Trained Modulation from ADSL_G.dmt to ADSL_2plus. i.e. use ADSL v.2 modulation.

 

[RAINSTORM]

I have the same situation. You said to change the modulation to only adsl 2+ so must i only mark the stuff that contains adsl2+ and nothing else?

 

[Wackyza]

Ye I gave that a shot, and it just kept saying "Synchronizing...". I assume, I'm not on a adsl2+ port

 

[RAINSTORM]

it is your port I was told the same thing and a friend of mine. He had to reapply to put him on a adsl2+ port.