All things Sunsynk (Deye, Inge, etc...)

LPCPT said:
There was some info about storing energy in a second geyser, which comes in as a much cheaper option ito hardware cost, but then bloody plumbers are soo expensive.
Just can't win.
Click to expand...
lol i do that :)
house had 2 geysers but bathrooms were close so didn't make economical sense to use both geysers at the same time so i connected them i series and kept the one off and only used them on days we couldn't stagger our showers.
when i got Solar i put it o a Geyser wise and let them both heat up from around 9 till 1400 - then water stays hot until the next day so geysers don't need to heat up in the evenings

but even with that on most days i still think i can get enough pv to fill up one more battery
 
Hi all. My sunsynk app is not reporting data anymore...is it linked to the maintenance they mentioned earlier? Is anyone else experiencing this?
 
shafti3 said:
Hi all. My sunsynk app is not reporting data anymore...is it linked to the maintenance they mentioned earlier? Is anyone else experiencing this?
Click to expand...
Ja, looks like there is maintenance / region shifting going on. Mine went earlier and is back.
 
Outage was for all of us Region 1's as they move us to the Region 2 side this weekend.

I have no data from 3:25pm yesterday to 10:40pm last night when the App started working.

I also cannot access System Mode settings on the App now. All part of the Region move being in progress until Monday I guess.
 
FlashSA said:
Outage was for all of us Region 1's as they move us to the Region 2 side this weekend.

I have no data from 3:25pm yesterday to 10:40pm last night when the App started working.

I also cannot access System Mode settings on the App now. All part of the Region move being in progress until Monday I guess.
Click to expand...

Mine not affected (yet).
 
AfricanTech said:
Damn.... a 2600w kettle...I'd get rid of that sucker on principle.

Did you say you have a 0.5C 5K battery? If so, there's your answer - 2600w is more than 0.5C on it's own - add the 200w and you're sitting at 2800w
Click to expand...

Recently got a Smeg kettle and the power draw seems to go to 5000w, is this possible ? Deye Inverter triped so not just the kettle can cause this unless the power draw was really that high
 
L-Dog said:
Recently got a Smeg kettle and the power draw seems to go to 5000w, is this possible ? Deye Inverter triped so not just the kettle can cause this unless the power draw was really that high
Click to expand...
My smeg draws around 2000-2200w...never higher.
Either you have other heavy loads or your kettle is faulty
 
Out of interest, who else sees LED globe flickering?

All the 3 watt down lighters are perfect, but I noticed the 8 watt outside Osram downlighters can sometimes flicker from when an appliance turns on.

One of the 3w globes fused in the kitchen, so I upgraded all 4 kitchen globes to 7w globes and now they are doing the same flicker.

It's strange that the 3w are unaffected or, that the stronger LED globes are affected.

Is this just an inverter normality?
 
When my 3d printer is running and its loadshedding the SSR on it makes a bunch of my LED globes flicker. Its fine when the grid is available.
Ive heard its an issue with some power supplies as well.
 
L-Dog said:
Recently got a Smeg kettle and the power draw seems to go to 5000w, is this possible ? Deye Inverter triped so not just the kettle can cause this unless the power draw was really that high
Click to expand...
Good luck with the SMEG kettle, if ever there ís a poor quality product this unfortunately is it.
 
FlashSA said:
Out of interest, who else sees LED globe flickering?

All the 3 watt down lighters are perfect, but I noticed the 8 watt outside Osram downlighters can sometimes flicker from when an appliance turns on.

One of the 3w globes fused in the kitchen, so I upgraded all 4 kitchen globes to 7w globes and now they are doing the same flicker.

It's strange that the 3w are unaffected or, that the stronger LED globes are affected.

Is this just an inverter normality?
Click to expand...
No it is not normal. The two most common causes are either poor quality LEDs or there is an issue with your wireing, normally related to the earth neutral bond.
 
My system just went offline in Region 1 and was added and is alive in Region 2 (I had an account in both regions - mine was in region 1 while my in laws and folks are in my region 2 account).

Looks like they are moving region 1's to region 2 today as was planned. All my historical data is gone, so I quickly took screenshots to save in case there are any issues with their data transfers over the next 1-4 weeks.
 
FlashSA said:
My system just went offline in Region 1 and was added and is alive in Region 2 (I had an account in both regions - mine was in region 1 while my in laws and folks are in my region 2 account).

Looks like they are moving region 1's to region 2 today as was planned. All my historical data is gone, so I quickly took screenshots to save in case there are any issues with their data transfers over the next 1-4 weeks.
Click to expand...
My data is gone, but I only have an account in Region 1. If I try and log on to Region 2, it says incorrect username. Are they transferring accounts or do I have to have a new account created?
 
Bucks_Fizz said:
My data is gone, but I only have an account in Region 1. If I try and log on to Region 2, it says incorrect username. Are they transferring accounts or do I have to have a new account created?
Click to expand...
From what I saw in Joel's Facebook post, it should be a case of using your region 1 credentials for region 2. Did you have any uppercase letters in your region 1 email? If yes, try lowercase as that change was mentioned
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X