Extending WiFi to a second dwelling

[GGG]

I am trying to extend my WiFi coverage to a second dwelling on our property.
Distance is only 41m, but all perimeter walls are cavity walls. Buildings are in clear line of sight.
I am using a TP Link W-8970 router. I have tried using a Ubiquiti Picostation M2 HP plugged into the router to extend range from the main house, but obviously the devices themselves, laptop and phone do not have the range to transmit back from the second house.
Any suggestions would be welcome as running a cable is out of the question.
I was thinking of buying M2 Nanostation and using that outside the main house and directed towards the second house, where i would place the Picostation. I just can not find any information if this will work or not!
Thanks.

 

[Kloofvreter]

Ubiquiti NanoStation Loco M2. Trust me, they work.

EDIT: Sorry, pressed SAVE too soon. Two NanoStation M2's in bridge mode.

 

[Necropolis]

Something like this:

<router house> -Antenna--> <--Antenna-<router other building>

 

[Kloofvreter]

Something like this:

<router house> -Antenna--> <--Antenna-<router other building>

Yup

 

[NorthPole]

Why not run a Lan cable? and stick a cheap router there.

 

[GGG]

LAN out of the question as area all paved

 

[GGG]

Ubiquiti NanoStation Loco M2. Trust me, they work.

EDIT: Sorry, pressed SAVE too soon. Two NanoStation M2's in bridge mode.

Thanks. Will the picostation not bridge with the M2?

 

[Genisys]

What types of speed do you need?

 

[GGG]

What types of speed do you need?

If I got 10 meg I would be happy

 

[GGG]

Something like this:

<router house> -Antenna--> <--Antenna-<router other building>

Would this be something like a lightbeam? And then how would I couple the second router?

 

[Necropolis]

Would this be something like a lightbeam? And then how would I couple the second router?

As per Slootvreter, use two of those NanoStation M2 things in bridge mode on either side of the link.

Then each router provides wireless or wired connectivity for the devices on its side and they communicate via the wireless bridge.

 

[sand_man]

http://shop.dbg.co.za/tl-wpa4220k.html

 

[NorthPole]

http://shop.dbg.co.za/tl-wpa4220k.html

Just watch out if there is a different DB board for the other house the power line method may not work...

 

[GGG]

Just watch out if there is a different DB board for the other house the power line method may not work...

Can't use this method as we both on three phase

 

[GGG]

As per Slootvreter, use two of those NanoStation M2 things in bridge mode on either side of the link.

Then each router provides wireless or wired connectivity for the devices on its side and they communicate via the wireless bridge.

How do I connect to the second router? And are there settings I need change?

 

[Necropolis]

How do I connect to the second router? And are there settings I need change?

Something like this:

https://help.ubnt.com/hc/en-us/arti...int-to-Point-Link-Layer-2-Transparent-Bridge-

 

[GGG]

Something like this:

https://help.ubnt.com/hc/en-us/arti...int-to-Point-Link-Layer-2-Transparent-Bridge-

Thank you, I will give this a shot. I have a wifi modem in the second dwelling, will the devices use that or connect through the M2?

 

[Necropolis]

Thank you, I will give this a shot. I have a wifi modem in the second dwelling, will the devices use that or connect through the M2?

I'd imagine they would connect through the Wifi on the modem - but I'm not 100% sure, I've never setup something like this before.

 

[GGG]

I'd imagine they would connect through the Wifi on the modem - but I'm not 100% sure, I've never setup something like this before.

Thanks for the help got two M2 on the way and I will use a cheap wireless router WR840N in second dwelling

 

[GGG]

Just a report back, thanks for the advice. Got 2 M2 Loco nanostations and a wifi router in other end.
Perfect signal transmission and all working well