Help needed

[seburn]

guys im lost could someone pls help me
....

Someone did make drivers and info was available in this thread iBurst Linux USB drivers
You say you have the drivers though, so then your problem is configuring pppOE.
If you have pppOE then you should be able to run "pppoe-setup". If you cannot find another device besides your network card then type ifconfig you should have three devices afaik eth0 eth1 and lo or something like that. If so try a possibly different pppOE client eg http://www.roaringpenguin.com/penguin/open_source_rp-pppoe.php. If not I am unsure? Maybe the drivers work differently or just don't work.

 

[seburn]

Oh didn't realise there were only USB modems available.

So what, do they have a permanent cord attached to them?

Or if they have a USB connector on the modem, would an ethernet-usb cord not solve the problem? Or is such a cord not possible?

Are there routers that can handle USB modems?

No perminant cord have a look

I assume a print server box would probably work but cannot say I have tryed it.