ADrunkTeddyBear
Expert Member
Will try it out when I get home on the AX3 and give feedback
-
Join the MyBroadband community
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
-
Question of the Day: Which is the most hair-raising South African mountain pass you've driven?
IPv6 Roll Out
- Thread starter AfriNatic
- Start date
Not sure if the AX3 supports Passthrough but that needs to be selected for it to work.
ADrunkTeddyBear
Expert Member
Not sure what settings were there for the WAN. Ill send screenshots this afternoon for feedback
odd, when i was running HE's tunnel ipv6-test.com detected it.
I've re-enabled Afrihost IPv6 on the mikrotik (dhcpv6 client on the pppoe with prefix delegation to a pool which goes to the lan).
Did catch it stop working once but it was just on one device while the others worked, and it rectified itself after a few mins. Other than that I havent caught it giving any problems.
Did catch it stop working once but it was just on one device while the others worked, and it rectified itself after a few mins. Other than that I havent caught it giving any problems.
@AfriNatic is OS the only provider that gets /60 and the rest /64?
Openserve and Vodacom PPPoE is /60
DHCP with us is /62
I'm confirming Vuma Reach.
EDIT: Vuma Reach is /62
Last edited:
/62? I can see FF gets a /64
Lets try Autoconfiguration (SLAAC/DHCPv6) first
Ok just looking at an FF line that had it's /64 from way back when you guys first rolled it out.
I just rebooted the router (DIR-825) and now the v6 is just stuck on "Connecting"
I changed "Get IPv6" to IPv6 via DHCPv6 but it didnt help (was automatically before)
Leave it the D-link take a while to get a response from our DHCP server.
alrighty... was always quick when it had its 64, still "Connecting"
No connection with these settings.
PS: this is the DLink that I got from Afrihost a couple of years ago.
Did you try to restart the router?
What other options do you have for the Autoconfiguration type except SLAAC + Stateless DHCP?
