IPv6 Roll Out

[starmage]

What other options do you have for the Autoconfiguration type except SLAAC + Stateless DHCP?

But as I understand it this is for the router to internal network - not for how the router will gets its address ? THis option is available irrespective what connection method is chosen.
The stateful DHCPV6 option wants me to enter starting and ending address range

 

[MonkeysUncle]

Anyone know how to change these on an Edgerouter X?

 

[AfriNatic]

But as I understand it this is for the router to internal network - not for how the router will gets its address ? THis option is available irrespective what connection method is chosen.
The stateful DHCPV6 option wants me to enter starting and ending address range
View attachment 1117170

Lets try stateful DHCPv6

 

[ADrunkTeddyBear]

Anyone know how to change these on an Edgerouter X?

Following this. I have plans on getting a UDM Pro next year and hopefully having enough cash for a full unify rollout

 

[AfriNatic]

But as I understand it this is for the router to internal network - not for how the router will gets its address ? THis option is available irrespective what connection method is chosen.
The stateful DHCPV6 option wants me to enter starting and ending address range
View attachment 1117170

We have had slight issues with our DHCPv6 server.

IPv6 should now be working on SLAAC+Stateless DHCP.

 

[jdido87]

I used 6to4 Tunnel and the below is the results I get without a connection drop. The test-ipv6.com result is still 0 though. Do I need a new router or is it not worth buying a new router?

 

[D.B.Cooper]

@AfriNatic All I'm getting is the default gateway and nothing else.

 

[AfriNatic]

I used 6to4 Tunnel and the below is the results I get without a connection drop. The test-ipv6.com result is still 0 though. Do I need a new router or is it not worth buying a new router?

View attachment 1117268

Must be on DHCPv6 to work if not we need to investigate why

 

[AfriNatic]

@AfriNatic All I'm getting is the default gateway and nothing else.

View attachment 1117274

View attachment 1117276
View attachment 1117280

I see a button at the bottom "Use IPv6 specified by ISP" What happens if you tick that button?

 

[D.B.Cooper]

I see a button at the bottom "Use IPv6 specified by ISP" What happens if you tick that button?

It appears you have to enter the address.

 

[AfriNatic]

View attachment 1117398

Okay then it wants a static config.

Drop me a pm with your pppoe username let me make sure you are enabled.

 

[Soul Assassin]

Can confirm it works for my friend, he restarted all of the things and did a tracert to Google which showed the IPv6 addresses.

 

[ADrunkTeddyBear]

So Im guessing I dont have to do anything with Vuma Reach ONT

ONT


WAN Settings on AX3


IPv6 Settings on the AX3

 

[AfriNatic]

So Im guessing I dont have to do anything with Vuma Reach ONT

ONT
View attachment 1117484

WAN Settings on AX3
View attachment 1117486

IPv6 Settings on the AX3
View attachment 1117488

What kind of options do you have when select bridge AP?

 

[ADrunkTeddyBear]

What kind of options do you have when select bridge AP?

 

[AfriNatic]

View attachment 1117496

Okay it doesn't look like it supports IPv6 passthrough.

It might work in AP mode though not sure this is something you need to test out.

 

[SeaSickMama]

Anyone know how to change these on an Edgerouter X?

Even changing the PPPoE on the EdgeRouter haven’t looked properly but can you direct me ?

or do you do the wizard every time ?

EDIT
ubnt@rtr2:~$ configure
[edit]
ubnt@rtr2# set interfaces ethernet eth1 pppoe 0 user-id joe
[edit]
ubnt@rtr2# set interfaces ethernet eth1 pppoe 0 password secret2
[edit]
ubnt@rtr2# commit
[edit]
ubnt@rtr2# show interfaces ethernet eth1 pppoe pppoe 0 { password secret2 user-id joe }
ubnt@rtr2# save ;
exit Saving configuration to ‘/config/config.boot’... Done
[edit]
ubnt@rtr2# exit exit

 

[ADrunkTeddyBear]

Okay it doesn't look like it supports IPv6 passthrough.

It might work in AP mode though not sure this is something you need to test out.

Will test shortly. Connecting to the ONT directly gives the a pass on the ipv6 test web page

 

[ADrunkTeddyBear]

AP mode sorted me out. Thanks for the assist @AfriNatic. Enjoy your weekend

 

[Freakboy]

Anyone know how to change these on an Edgerouter X?

I've been trying since last night no joy

I tried this and this after a long long search but the PPPOE connections still refuses to get a IPv6 address.
Local on the switch0 all my devices do have both addresses, just the external WAN IPv6 that doesn't work.

Hopefully @AfriNatic can get the guys to test and let us know what we have to do to get it working.