Do you mind sharing where to get to this ipv6 option as it might assist other clients struggling.
-
Join the MyBroadband community
South Africa’s biggest forum. Discuss, discover, and connect with thousands of members.
-
Question of the Day: Which is the most hair-raising South African mountain pass you've driven?
IPv6 Roll Out
- Thread starter AfriNatic
- Start date
Do you mind sharing where to get to this ipv6 option as it might assist other clients struggling.
jacosmit
Expert Member
Sure!
The pool prefix should be ::/64, so far as my testing went, otherwise the prefix pool errors out.
Just working through the settings that whatismyip.com picks up an IP.
jacosmit
Expert Member
Yeah, but 64 apparently should not really matter.
@AfriNatic will AH be assigning reverse DNS to the v6's handed out?
TheMannequin
Active Member
- Joined
- Feb 24, 2016
- Messages
- 58
- Reaction score
- 14
I have a RT-AC86U, with Asuswrt-Merlin 386.5_2 firmware, and it's been the 3rd time now that I turned it on, everything worked for a while....and then nothing!
Reboot router, it works for a bit again and then the same over and over.....
Only difference is that I use the auto DNS server and not the Google ones.
SO for now I just switch it off again....not really in the mood to struggle with troubleshooting yet as IPv4 still works perfectly.
Currently we don't have it set.
The prefix is not static and will remain the same as long as the router mac stays the same and a lease renewal is successful. If it fails a new prefix is allocated.
McGuywer
Executive Member
Mikrotik & Frogfoot? Does anyone have configs for me please?
I tried WebSquad's settings pasted somewhere else but I am missing something.
I tried WebSquad's settings pasted somewhere else but I am missing something.
Gandalf the Gray
Well-Known Member
- Joined
- Apr 17, 2018
- Messages
- 302
- Reaction score
- 216
I wanna ask if someone could say from the attached screenshots if my IPv6 is ok. I have a D-Link DIR-825ACG1. The first three pics are from my router, and the last one from https://test-ipv6.com/.
I have followed the instructions for my router, but why does it keep on saying C
onnecting?
I have followed the instructions for my router, but why does it keep on saying C
onnecting?Gimli_
Expert Member
Mine looks like this
Gandalf the Gray
Well-Known Member
- Joined
- Apr 17, 2018
- Messages
- 302
- Reaction score
- 216
^^ My router now says connected the whole time (IPv6), so thats good. Probably have to wait 12 hours as someone said in other thread for https://test-ipv6.com/ to pick it up
Stingray
New Member
- Joined
- Oct 12, 2016
- Messages
- 1
- Reaction score
- 1
Echoing McGuywer. If anyone have got mikrotik settings for IPv6 on FrogFoot please share
This is mine that just keeps on searching. RouterOS 6.49.5
jacosmit
Expert Member
Sorry, not very active here anymore. Go back to the few pages, I figured mines out.
jacosmit
Expert Member
Hi there, go back a few pages. I figured out my Openserve/Afrihost. In the end the biggest issue was the ipv6 being disabled in the settings.Echoing McGuywer. If anyone have got mikrotik settings for IPv6 on FrogFoot please share
View attachment 1294890
Hi,
Yes IPv6 is fully enabled on our network.
There are some issues with certain areas and I'm tackling these complaints on a case by case basis for example MetroFibre Nokia rollouts that doesn't work with DHCPv6.
Yup, my install uses a Nokia ONT.