Media Server on TP-Link WDR4300

Ecco

Honorary Master
Joined
Jun 4, 2007
Messages
11,664
Reaction score
8,772
I bought the TP-Link WDR 4300 in the reverse auction on this site.

Cool router. Thanks Uniterm.

I am having issues with the media server though, and am having quite inconsistent behavior.

I first tested it, got it up and running in no time - could access the media no problem. I had to do a proper install, so took it down etc, set it up clean, proper wiring etc. Didnt change the settings. This time around can see the folders on the media server, but none of the content.

No stress, decide I will use a different HDD, plug that in, same problem. Unplug it, connect it to the second USB port, setup the folders and bobs your uncle, its working.

I rebooted the router to change the security settings, and back to the same problem, can see the media server, and the folders, but no content.

Then I tried putting the security settings back to the original way. I tried swapping the USB port again etc - no luck.

Anybody has some suggestions on how to resolve or what I could be doing wrong?
 
Did a firmware upgrade, seems to have done the trick. Will update this thread if anything changes.
 
I made the mistake of setting stuff up *then* doing a firmware upgrade... Firmware upgrade should probably be the first thing...
 
I had to setup everything again too. Didnt take long though, that quick setup is easy to use.
 
An issue I came across is that Samsung TVs won't play any of the files on the hard drive plugged into the router :( Effectively wiping the benefit of having a media drive without having a PC on all the time. The TV plays the files fine when the HDD is plugged into the TV usb. Some Googling revealed it's a limitation on Samsung TV firmware.

Anyone had the same issue?
 
Top
Sign up to the MyBroadband newsletter
X