NIC adapters for BartPE

[Jonny Two Shoes]

Hi all,

Once again a problem as usual

Just wondering if anyone can help as I have done quite a bit of reading but found no solution.

Im trying to get Network Support going in the BartPE live cd. Reason being I would like to store Driveimage XML images on the network as our only external DVD reader/writer has packed up and it doesn't seem like these guys will be getting a new one.

So I find out that there are problems loading the Dell Broadcom Net Xtreme 57xx drivers. Some people have managed to get it right but their explanation is beyond my understanding.

I have added a driver pack plugin that includes drivers for the Net Xtreme 57xx and burned a new bartpe image to disk but it still says "Network Adapter Not Found".

Any ideas?

 

[Ryder_JHB]

I have had so many issues with network drivers, in winpe 1.5, I have given up...

The new Vista PE (2.0) has a new feature called "drvload" - you can load drivers on the fly, no reboots necessary!

 

[repitah]

Download and extract the drivers (using only the winxp files/directory) to pebuilder313\drivers\Net\BCM57xx
Recompile bartPE iso and write.

drivers directory should look something like this:
Directory of C:\Transfer\pebuilder313\drivers\Net

2007/06/21 09:19 AM <DIR> .
2007/06/21 09:19 AM <DIR> ..
2004/10/21 08:18 PM 0 Create a folder here and put the network drivers in it
2007/05/23 01:48 PM <DIR> Intel1000
2007/05/23 01:41 PM <DIR> P5GD2

Directory of C:\Transfer\pebuilder313\drivers\Net\Intel1000

2006/02/03 02:21 PM 21,868 e1000325.cat
2005/12/21 10:52 PM 2,848 e1000325.din
2006/01/06 06:07 PM 336,492 e1000325.inf
2006/01/06 04:54 PM 163,840 E1000325.sys
2006/01/04 07:57 PM 163,840 e1000msg.dll
2005/12/21 10:52 PM 2,848 e1000nt5.din
2006/01/06 04:53 PM 157,696 E1000NT5.SYS
2005/12/21 09:29 PM 2,845 e1e5032.din
2006/02/03 09:54 AM 174,080 E1e5032.SYS
2006/02/17 06:21 PM 14,370 e1e5132.cat
2005/12/21 09:29 PM 2,845 e1e5132.din
2006/01/23 07:15 PM 192,478 e1e5132.inf
2006/02/03 09:55 AM 179,200 E1e5132.sys
2006/01/25 03:59 PM 21,504 NicCo.dll
2006/01/20 04:04 PM 56,832 NicEtCo.dll
2005/12/21 08:04 PM 20,992 NicInst.dll
2006/01/04 08:01 PM 126,976 PROUnstl.exe

Directory of C:\Transfer\pebuilder313\drivers\Net\P5GD2

2005/03/14 11:00 AM 211,243 NetrtOEM.cat
2005/03/14 01:23 PM 179,064 NetrtOEM.inf
2005/03/04 05:09 AM 105,984 Rtlnic64.sys
2005/03/04 05:10 AM 74,496 Rtlnicxp.sys

 

[Jonny Two Shoes]

Thanks repitah...will give it a go

 

[Jonny Two Shoes]

OK i created the BCM57xx folder and copied the extracted Broadcom XP drivers...there were only three files.

BartPE now picks up the Broadcom device and the adapter works perfect...I can ping any PC on the network

However..problem again:

I cannot access any shares or if I try Go\Run \\servername it does nothing. As there are domains I check to see if I can Map drives but I only see an empty WORKGROUP.

Also when I started the DHCP network in BartPE it succesfully loaded the adapter but I got DriverNodes not found for:
PCI\VEN_8086&DEV_2772&SUB..........long long name.

Just a question repitah: The Intel1000 and P5GD2 were specific to your setup or not?? because I omitted those and just used BCM57xx folder.

As you can see im new to BartPE and live CD's in general

 

[Jonny Two Shoes]

Any ideas anyone??

The fact that I can ping any local IP and 127.0.0.1 and get a reply tells me the adapter is working perfectly.

What is missing??

 

[The_Techie]

I've had so trouble with the BartPE networks that I've given up

 

[Jonny Two Shoes]

Come on man !!! Dont give up lol

Well if I don't come right I reckon I will get myself an external HDD. That should solve all my image problems

 

[repitah]

Try going into command prompt and doing a "net view" "net use" after you've run the PE network configurator (actually, try using the file share / map drive facility there)

Also try using a VM to load the iso (saves you from bouncing between computers / rebooting) to test