Old Telkom Router IP Address

[portcullis]

I had an old single port Telkom POTS Router in the cupboard.

This morning I wanted to commission a self install, got the old thing out to test the line, but suddenly can't get into it.

It powers up and the ethernet light comes on to show it's plugged into the switch, but I can't ping it, telnet into it or get a web interface.

Does anyone have an idea as to where I can download a manual?

I pressed the reset button in the hope that it would go back to 10.0.0.2 but that didn't work.

 

[StoneCold]

In Windows,open up the command prompt and type ipconfig. It should list a gateway IP, that of course will be your router's IP if it is still in a working order

 

[Park@82]

192.168.0.x ?

 

[kilos]

Try 192.168.0.1 or 192.168.1.1

 

[portcullis]

In Windows,open up the command prompt and type ipconfig. It should list a gateway IP, that of course will be your router's IP if it is still in a working order

And what if the router's got DHCP disabled and isn't serving up IP addresses?

 

[Mineer]

if you reset the modem then dhcp is enabled by default

 

[portcullis]

if you reset the modem then dhcp is enabled by default

Negative.

 

[portcullis]

Suppose I should add that the router's old.

 

[Park@82]

What is the exact make? http://www.telkom.co.za/products_se...tRouter_16Dec04_1227_self_20install_20_2_.pdf ?

 

[Park@82]

also see: http://www.routersetup.co.za/manuals.php

 

[portcullis]

What is the exact make? http://www.telkom.co.za/products_se...tRouter_16Dec04_1227_self_20install_20_2_.pdf ?

Not that one.

Imagine that one, but with only one ethernet port.

 

[straffe]

Original POTS Router IP: 192.168.10.200

Default username: admin
Default password: epicrouter or administrator

If memory serves me correct