Sediment filter for borehole water?

Okty

Expert Member
Joined
Aug 25, 2009
Messages
2,394
Reaction score
2,464
Hey guys

I had a borehole done awhile ago, however, the problem is, the water has a lot of fine 'dust' in it.

I assume it is from the drilling through the rocks that leeches into the water over time. It is quite noticeable, i.e. the water coming out has a 'silver/grey' appearance, you can smell the 'dust-smell' when hold the water at your nose etc. Sometimes I get a layer of water where it becomes clear, however, there might still be dissolved dust in it.

I am thinking of getting a sediment filter, since at the end of the day I would like to use the water for washing and bathing.

Any suggestions for sediment filters that won't cost an arm or a leg?

One promising filter I found was this one:


Can filter as small as 1 micron.

Replacement cartridge also doesn't seem too expensive, however, don't know how long it will last before replacement:


Thanks!
 
I'm using a 3 stage big blue with UV for municipal backup. Also goes down to 1 micron. With a UV sterilizer to make double sure. It's probably overkill for me, but should be fine as a prefilter for a borehole...

 
Last edited:
You want to drink the water? Then you might want to get it tested first
I am thinking of getting a sediment filter, since at the end of the day I would like to use the water for washing and bathing.
Nope, just for washing and bathing. But, maybe testing it won't be a bad idea. :unsure:

I'm using a 3 stage big blue with UV for municipal backup. It's probably overkill, but also goes down to 1 micron. With a UV sterilizer to make double sure. It's probably overkill for me, but should be fine as a prefilter for a borehole...

Thanks, maybe I will have a look at that, could use it then for drinking water also at the end of the day.
 
I'm using a 3 stage big blue with UV for municipal backup. It's probably overkill, but also goes down to 1 micron. With a UV sterilizer to make double sure. It's probably overkill for me, but should be fine as a prefilter for a borehole...


We have the same but treatment of borehole water often includes a lot more depending on mineral and contaminant content. My inlaws live on an estate that only uses borehole water for the houses, it is pretreated before it reaches the house but they still have 'big blue' filters, a water softener and for drinking water a 5 stage reverse osmosis filter system.
 
We have the same but treatment of borehole water often includes a lot more depending on mineral and contaminant content. My inlaws live on an estate that only uses borehole water for the houses, it is pretreated before it reaches the house but they still have 'big blue' filters, a water softener and for drinking water a 5 stage reverse osmosis filter system.
Definitely, which is why I said it should be used as a pre-filter. It's fine for municipal, but not on its own for a borehole...
 
I'm using a 3 stage big blue with UV for municipal backup. It's probably overkill, but also goes down to 1 micron. With a UV sterilizer to make double sure. It's probably overkill for me, but should be fine as a prefilter for a borehole...

Uncle has a borehole and he uses a big blue for all cold water, and then in the kitchen there is a drinking water spout that goes through another 4 stage filter. Hot water goes straight from borehole to gas geyser.
Testing shows that Aluminium levels to be higher than tap water but below dangerous levels.
 
Top
Sign up to the MyBroadband newsletter
X