Source Enclosure Like This

[beerygaz]

I see these cool IP65 enclosures used extensively in US projects. The back board is ideal for attaching boards and breakouts as well as routing cables neatly. Anyone know if there's a local source?


Link to Amazon (US)

 

[saor]

https://www.amazon.co.za/Gratury-Waterproof-Enclosure-Electrical-290%C3%97190%C3%97140mm/dp/B08282SQPT?crid=2USMQ06J9VR4F&dib=eyJ2IjoiMSJ9.XxYMfJS4SCLOBoLbBs2uvS_nm_NOkuXMC8P-O1bAps2-zanXSLr7fsMOnySNBNsyvsAa__J__EIHF5K5WvzVP3R-PZ-25oTsgBWj29QJ0mdTSQR2ksPR0RUQ0coSz8P4WpcDIuClMvap_gSPnr2B5A.wgXuQf-vBovUJtErO7CUSRz6_GkHPUwECtaQiDPl9DQ&dib_tag=se&keywords=IP67+Waterproof+Plastic+Enclosure&qid=1738562458&sprefix=ip67+waterproof+plastic+enclosure%2Caps%2C218&sr=8-1

https://www.amazon.co.za/Gratury-Waterproof-Electrical-Transparent-290%C3%97190%C3%97140mm/dp/B08282VRXW

 

[SmartPad]

We have used the Allbro Allbrox boxes on projects (the one pictured below is the "Allbrox 5") they come in a range of sizes, and usually readily available here: https://www.livecopper.co.za/search?page=2&q=allbrox

They come in a range of configurations too, not too sure if they come with a perforated back board like your picture, but the ones we use have a solid "SMC Plate" that's quite easy to remove and drill through as needed.

 

[hilton]

I bought two of these to mount a 4 port PoE switch on my boundary wall to supply power to IP cameras. I run a fibre back into my house.

Essentially this is a fibre box but I just ripped out the guts. Mounts easily and has a locking mechanism but replaced the plastic key and notched bolt with a suitable stainless steel cap screw. I have a million hex keys (as we all do).

I initially bought the smaller fibre box but it was too small for my switch but I'm now using it to house a SONOFF 4Ch Pro to switch irrigation valves.

Large Fibre Box. R246 incl.

More than happy to take a photo of the inside if you need.