SunSynk load schedules - and pulling from the grid...

[rh1]

Shot in that dark, do you have Grid peak shaving turned on?

What does this do?

 

[AchmatK]

How do I see this or set it? As far as I know it’s instant?

I think it's called grid reconnect and it's in seconds. Under inverter settings and grid. Will find it in the morning if you haven't come right yet.

 

[AchmatK]

but why only when simulating a failure does it happen vs it being fine after a blackout?

I had an issue with the earth leakage tripping after load shedding. When I increased the time to reconnect it fixed this issue for me.

I'm just taking a stab in the dark at things to try.

 

[HowTo]

What does this do?

In the old day we called it maximum demand.
Example
Smelters to limit demand during day time, at night you go maximum power on smelters. (after 21:00 till 05:00)
We used Conlog system at that time to contol maximum demand. When you used more than maximum demand allowed, you got billed for the rest of the month at higher tarrifs.
See Esdom wants to do this again. Power becomes cheaper after peak time. Nothing new.

 

[shadow_man]

Back to square 1 - unable to reproduce the issue today.

Reset inverter --> got it not feeding from grid when it shouldn't --> placed mains off / on (with min delay and with sizeable delay) --> not taking from grid. This is bugging the absolute **** out of me

 

[theharvs]

I had an issue with the earth leakage tripping after load shedding. When I increased the time to reconnect it fixed this issue for me.

I'm just taking a stab in the dark at things to try.

What was the delay before and what is it now?

 

[DeSLAM]

Hopefully you not just referring to the trickle charge of +-20W? Which is always on if you are running it grid tied.