Synapse 600 inverter

jayjim

jayjim

Member
Joined
Jan 11, 2023
Messages
18
Reaction score
1
Anyone own a synapse 600 ups/inverter. Charging amps can se preset.5,10,15 or 20 amps. These inverters seem to overheat at 15 and 20amp settings.Overheating sets in within 5 minutes of operation.( Lifepo4 108ah batt. good ventilation all round).Any thoughts?
 
jayjim said:
Anyone own a synapse 600 ups/inverter. Charging amps can se preset.5,10,15 or 20 amps. These inverters seem to overheat at 15 and 20amp settings.Overheating sets in within 5 minutes of operation.( Lifepo4 108ah batt. good ventilation all round).Any thoughts?
Click to expand...
Seems the heat dissipation is not too lekker on a high current. Does the fans Pull into the inverter or does it have a filter to stop dust? Usually internals get clogged with dirt and stuff so hinders its performance to cool the heatsinks of the charging circuit.
 
DuracellBunny said:
Seems the heat dissipation is not too lekker on a high current. Does the fans Pull into the inverter or does it have a filter to stop dust? Usually internals get clogged with dirt and stuff so hinders its performance to cool the heatsinks of the charging circuit.
Click to expand...
Inverter is brand new.This is the second one that does the same.1st Inverter was exchanged in 2 days of purchase thinking maybe it was a dud.
 
Hi, please may you assist me, if possible.
We have a Synapse 7.2m inverter connected to a Hubble battery. Periodically, after loadshedding, while the battery is charging there is a deep whirring sound that emanates from the inverter that lasts for about 10 seconds followed by a barely audible click from the battery. This process repeats continuously while the battery is charging and sometimes continues for hours afterwards. Any idea what could cause that?
 
keeganrc1 said:
Hi, please may you assist me, if possible.
We have a Synapse 7.2m inverter connected to a Hubble battery. Periodically, after loadshedding, while the battery is charging there is a deep whirring sound that emanates from the inverter that lasts for about 10 seconds followed by a barely audible click from the battery. This process repeats continuously while the battery is charging and sometimes continues for hours afterwards. Any idea what could cause that?
Click to expand...
What is the voltage of the battery before and after the click and during the hours afterwards?
 
Hello, thank you for the reply.
Voltage before click:
Input: 228
Output: 229
Directly after the click:
Input: 230
Output: 230
This continues for a few hours. Once it stops, I’ll tell you what the voltage is.
I took a video of what happens but I don’t see an option to post a video here.
 
keeganrc1 said:
Hello, thank you for the reply.
Voltage before click:
Input: 228
Output: 229
Directly after the click:
Input: 230
Output: 230
This continues for a few hours. Once it stops, I’ll tell you what the voltage is.
I took a video of what happens but I don’t see an option to post a video here.
Click to expand...
What is the voltage of the battery before and after the click and during the hours afterwards?

Put the video on YT.
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X