Telkom Mobile LTE Leaderboard

Just double click it if you have google earth loaded on your computer and it will populate on google earth search.
 
The signal spreads are a graphic to show position. For an indication of coverage you would need to look at the Telkom website. This is just to identify tower positions and not coverage.
 
Ah was trying in google maps. Will install google earth.

Thanks
 
Hi.

Anyone have any updated inputs for Cell C, Mtn or Telkom?

For google earth.
 
I've had a fault out with Telkom for 8 months now for my LTE; collapsed from 75mbps to < 0.5mbps overnight back in August, restoring to around 5mbps after a week (at least I could internet bank again). Had visits by techies, no problem my side, they just refer it to 'network' who do nothing. Slight improvements over the months have got me up to around 20mbps if no congestion. If there was an alternative in my area, I would dump Telkom immediately, but no no fibre, etc., expected in my area for the next millennium.
 
Doug_Dread said:
I've had a fault out with Telkom for 8 months now for my LTE; collapsed from 75mbps to < 0.5mbps overnight back in August, restoring to around 5mbps after a week (at least I could internet bank again). Had visits by techies, no problem my side, they just refer it to 'network' who do nothing. Slight improvements over the months have got me up to around 20mbps if no congestion. If there was an alternative in my area, I would dump Telkom immediately, but no no fibre, etc., expected in my area for the next millennium.
Click to expand...

Have you tried switching from 1800MHz to 2300MHz?
 
Doug_Dread said:
Erm... no .... how?
Click to expand...

See this thread:
https://mybroadband.co.za/vb/showth...x-for-new-Huawei-HiLink-devices-(E5186-B315s)

go to /api/net/net-mode

replace

<request>
<NetworkMode>03</NetworkMode>
<NetworkBand>3FFFFFFF</NetworkBand>
<LTEBand>7FFFFFFFFFFFFFFF</LTEBand>
</request>

with

<request>
<NetworkMode>03</NetworkMode>
<NetworkBand>8000000000</NetworkBand>
<LTEBand>8000000000</LTEBand>
</request>

and write to API

Your modem will connect only to 2300MHz base stations.
Click to expand...
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X