Time to replace my Linksys WRT54GL

DagegeN

Expert Member
Joined
Jun 1, 2006
Messages
1,315
Reaction score
0
Location
Aston Manor, Kempton Park
Howzit.

It is time to replace my 2 WRTs in my house with something faster and more CPU power as i am maxing out it's CPUs and require more throughput.

Any ideas of what to replace it with?
It must also be-able to run the DD-WRT firmware.
It must have wireless faster than 54mb/s
It must have a WAN port
It must have a CPU of more than 200 MHz
 
Last edited:
Howzit.

It is time to replace my 2 WRTs in my house with something faster and more CPU power as i am maxing out it's CPUs and require more throughput.

Any ideas of what to replace it with?
It must also be-able to run the DD-WRT firmware.
It must have wireless faster than 54mb/s
It must have a WAN port
It must have a CPU of more than 200 MHz

I'll take one off your hands.

Cuz saw mine and is jealous so he's been hounding me to get him one
 
Replaced my WRT with this : http://www.dbg.co.za/product_info.php?cPath=1_55_56&products_id=201

400 or 600mhz cpu (cant remember and cant login right now) and way more memory, the linksys was a mission to squeeze all on my apps on.

WRT support is offical as well, which is a bonus!

CPU: Atheros AR9132 400MHz
Switch: Marvell 88E6060-RCJ1
Memory: HY5DU561622ETP-5 (16Mx16, 32M)
Flash: 25P64V6P (8M)
Radio: AR9001
 
Last edited:
Replaced my WRT with this : http://www.dbg.co.za/product_info.php?cPath=1_55_56&products_id=201

400 or 600mhz cpu (cant remember and cant login right now) and way more memory, the linksys was a mission to squeeze all on my apps on.

WRT support is offical as well, which is a bonus!

CPU: Atheros AR9132 400MHz
Switch: Marvell 88E6060-RCJ1
Memory: HY5DU561622ETP-5 (16Mx16, 32M)
Flash: 25P64V6P (8M)
Radio: AR9001

Ah yes i was eye-balling that model but the price put me a bit off "not knowing if it's good quality", can it be configured as a repeater aswell?
Currently i have my 2 WRTs linked via wifi and both of them can still be used as Access Points while they are "paired" with each other.
 
Ah yes i was eye-balling that model but the price put me a bit off "not knowing if it's good quality", can it be configured as a repeater aswell?
Currently i have my 2 WRTs linked via wifi and both of them can still be used as Access Points while they are "paired" with each other.

Had the same concern, but Atheros, Marvell etc. can be found in the original Linksys. The RAM I believe is Hynix as used by apple.

Router has serious range as well, suites me fine. Personnaly havent tried to set it up as a repeater.
 
Top
Sign up to the MyBroadband newsletter
X