All things Shelly

grok said:
Those are able to group together, so you can program clusters that act together.
Click to expand...
Understood, Mesh type.

It's up to you, just buy a couple extra for each room if you do decide to go this route.

Alternatively, a single Shelly 1 would do the trick for each room and passage or Dimmer if you really want to get fancy.

Pops behind the light switch.


ONE_DIMMER_image_three_600x600.png
 
@ShellySA do you guys manufacture the bayonette style of the Shello Duo? If so it would be great to add that to the product lineup as it is a very common standard in South Africa, a lot more common than E27.
 
ShellySA said:
Only E27, as most new fixtures (pendants and lamps) from Zebbies, Glo-lighting, Superbalist are this configuration.

For B22 - bayonet, there is an adapter

www.futurelight.co.za

Lamp Holder Adaptor - B22 to E27

Lamp Holder Adaptor - B22 to E27 Length: 60mm
www.futurelight.co.za www.futurelight.co.za
Click to expand...
Aah that is a pity. The annoying thing about the adapters is it raises the height of the bulb, which is sometimes not acceptable.

And also thanks for that link to that lighting company, they have good stuff at decent prices and literally a 1 minute drive from my work.
 
I agree with you on the raised bulb height.

Sure, glad to have helped.
 
ebendl said:
The Shelly devices, especially the PM which is real tiny compared to the Sonoff Pow.
Click to expand...
1PM was designed for Geyser timing+power monitoring (geysers with elements not exceeding 3500 Watts) ie most Kwikots and Franke.

1PM's form factor, entails that it installs at Db board DIN rail slot, connected to the geyser's isolator. (as a result there is no concern of overheating by being installed into a ceiling, as temp can exceed 40°C up there)

ONE_PM_image_three_600x600.jpg


Sensor will shut off the PCB of Shelly 1PM if in the event that temp does reach 40°C, protecting circuits.

ONE_PM_image_five_600x600.jpg
 
Yeah, unfortunately my geyser is 4kW, so i'm not risking a PM. Hence the wait for an EM, which I'll then use with a contactor to actually switch on/off the geyser (instead of using a geyserwise).
 
Any way of scheduling a swimming pool to switch on/ off?

Garden lights?
 
Last edited:
Doubt that you want to monitor power consumption for the pump or garden lights?

If not then a Shelly 1 for the pool and another Shelly 1 for the lights.

Takealot.com: Online Shopping | SA's leading online store

South Africa's leading online store. Fast, reliable delivery to your door. Many ways to pay. Shop anything you can imagine: TVs, laptops, cellphones, kitchen appliances, toys, books, beauty & more. Shop the mobile app anytime, anywhere.
www.takealot.com www.takealot.com
 
ShellySA said:
Doubt that you want to monitor power consumption for the pump or garden lights?

If not then a Shelly 1 for the pool and another Shelly 1 for the lights.

Takealot.com: Online Shopping | SA's leading online store

South Africa's leading online store. Fast, reliable delivery to your door. Many ways to pay. Shop anything you can imagine: TVs, laptops, cellphones, kitchen appliances, toys, books, beauty & more. Shop the mobile app anytime, anywhere.
www.takealot.com www.takealot.com
Click to expand...

No, don't want to monitor, just schedule. Tks.
 
Yes,

Takealot.com: Online Shopping | SA's leading online store

South Africa's leading online store. Fast, reliable delivery to your door. Many ways to pay. Shop anything you can imagine: TVs, laptops, cellphones, kitchen appliances, toys, books, beauty & more. Shop the mobile app anytime, anywhere.
www.takealot.com www.takealot.com

With a bit of luck Leroy merlin, Builders warehouse as well and we are based in Midrand Gauteng,

Trust this clarifies your question Laanie?
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X