Durban

Im sorry, but I just have to be the one to ask...... How soon ? :)

________________________________________________________________________________________
Save a horny friend........

SETUP: Durban Mal Park(36) 53% sig 128k | D-Link Tri-Mode Dual Band Wireless router and a PCI 108Mbps wireless card :) irc.shadowfire.org #mywireless
 
no hope.. just did this ping thing to www.sentech.co.za

Ping statistics for 66.18.65.115:
Packets: Sent = 50, Received = 48, Lost = 2 (4% loss),
Approximate round trip times in milli-seconds:
Minimum = 397ms, Maximum = 3462ms, Average = 2147ms

at least theres an improvement in loss :P

-----------------------------------------------------------
Reality is boring for those who dont know ANYTHING about it.
 
Proasm, I cant connect, I keep getting allocated a IP address of 10.11.253...... and a subnet of 255.25.255.255

No1 can tell me what the prob is......

Oh, and my DNS is waaaay off.

________________________________________________________________________________________
Save a horny friend........

SETUP: Durban Mal Park(36) 53% sig 128k | D-Link Tri-Mode Dual Band Wireless router and a PCI 108Mbps wireless card :) irc.shadowfire.org #mywireless
 
It was also doing that on the usb connection. It wouldnt connect on mysig. as well, only with the MW software

________________________________________________________________________________________
Save a horny friend........

SETUP: Durban Mal Park(36) 53% sig 128k | D-Link Tri-Mode Dual Band Wireless router and a PCI 108Mbps wireless card :) irc.shadowfire.org #mywireless
 
*blink* Snadboy? But what about the IP problem?

________________________________________________________________________________________
Save a horny friend........

Durban Mal Park(36) 39% sig 128k | D-Link Tri-Mode Dual Band Wireless router | PCI 108Mbps wireless card :) |irc.shadowfire.org #mywireless
 
sounds to me like Rhino is being logged onto the network as a "guest" ... don't remember that being available of late....

<hr noshade size="1"><font size="1"><div align="right">8:00 Thursday 26 August 2004 is <font color="red">D-Day</font id="red">....
<s> 16 17 18 19</s> 20 <font color="green">21 20</font id="green"> 23 24 25 <font color="red"><b>26</b></font id="red">
</div id="right"></font id="size1">
 
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by ProAsm</i>
<br />Over the course of this weekend (3 days) and during the hours of midnight to 06:00 <b>all</b> Towers will be effected by the NodeB upgrades, so if you get disconnected during the early hours you'll know why [;)]
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Thanx for that - is this MySmokeSignal Nationally or only in Durban ....or was the "<b>all</b>" obvious to all but me [8D]

Any firmware for clients yet ? [:p]

<hr noshade size="1"><font size="1"><div align="right">8:00 Thursday 26 August 2004 is <font color="red">D-Day</font id="red">....
<s> 16 17 18 19</s> 20 <font color="green">21 20</font id="green"> 23 24 25 <font color="red"><b>26</b></font id="red">
</div id="right"></font id="size1">
 
Durban only - Gauteng and CT have already been done.
I have a 5.0.1.59 modem firmware here but I believe its buggy.
Depending on how buggy I may give it out to some of you.
We do use it though to test the new NodeB upgrades.

Rhino - http://www.snadboy.com/RevelationV2.zip

<hr noshade size="1"><center><font color="blue">MyWireless Stuff</font id="blue"></center>
 
Rhino, the 10.11.253.... ip number happened to me too yesterday.
I simply disconnected my broadband router, used the USB cable
and used ProAsm's RESET facility in MySignal. I then logged in
using Mysignal... did a shutdown and re-connected using the
network cable and router again. Connected without any problems!
Should this happen again, I suggest you try this.
For some reason, if they do any changes on Sentech's authentication
server etc. etc. your router will not be able to cope without
some manual intervention using your USB connection.

<font size="1"><font color="black">Bay of Plenty :</font id="black"><font color="blue"> Signal 48% - SNL 17 - ber 71% :</font id="blue"><font color="green"> D-Link DI-604 - PPPoE :</font id="green"><font color="orange"> 8dBi Patch Antenna :</font id="orange"> Firmware 4.2.1.8</font id="size1">
 
Now im more confuzed than ever. I get home, and force of habbit turn everything on. Router connects for me 1st time with no probs at all, and nothing has changed. DBNNET: I tried that I dont know how many times laast night. I kept on getting the same IP using USB.

Thanks Proasm, ive downloaded that as well to have a look see wots goin on.
The call centre say my machine/tower was ghosting false connects or something??????

________________________________________________________________________________________
Save a horny friend........

Durban Mal Park(36) 39% sig 128k | D-Link Tri-Mode Dual Band Wireless router | PCI 108Mbps wireless card :) |irc.shadowfire.org #mywireless
 
Ive been experiencing speeds no higher than about 100Kb/s on the speed test since about 2 days ago.. is anyone else in the durban north area having these probs (im on 256k) ??

-----------------------------------------------------------
Reality is boring for those who dont know ANYTHING about it.
 
I'm getting user rejected by network - please check username password
Anyone else experiencing this ?

Mal Park 36 256k.
 
You must log in or register to reply here.
Back
Top
Sign up to the MyBroadband newsletter
X