Elastix 3 multi-tenant

[Fl3tch]

Good day all

Has any one ever used the new Elastix 3 MT PBX and got it working 100%?

I have been working on it about 3 day's straight and only have the extensions registered and calling internally.

The problem is the trunks, it registers but i cant make any outgoing or incoming calls.

I have done so much research but cant find a solution.

Any help would be appreciated.

 

[gfmalan]

You didn't say, but to which SP do you make the trunk? and do you use the correct codec?

I'm going to DL this version and try to setup a MT version.

Oh and welcome to MyBB

 

[Fl3tch]

Hey gfmalan

Thank you for the Welcome.

Sorry about that I am using Mweb

The problem is there are no way of adding the trunk like in the old days it looks like its all script based and from the DB and not the sip_additional.conf.

Long story short you cant add it like Mweb requires.

canreinvite=nonat
nat=yes
context=from-trunk
host=196.28.95.12
secret=XXXXXXXX
type=peer
username=2728XXXXXXX
disallow=all
allow=g729&ulaw
fromuser=2728XXXXXXX
trustrpid=yes
sendrpid=yes
insecure=invite
qualify=yes

U need to use the interface they supply.

They did a nice job though.

Let me know if you need help setting up the extensions, took me a while to get it working and made sense in the end.

 

[Fl3tch]

Good day all

Its a new day lets start from scratch.

Any one out there willing to share there ideas?

 

[gfmalan]

Good Morning,

Does MWeb support alaw/ulaw or only g729?

And if so, did you buy the lic for atleast 1 lic for g729

 

[Went_For_Beer]

I got it working in my test environment, you have to play around in the settings. The have changed the layout but it is possible. It is a b**ch but works

 

[Fl3tch]

Good Morning,

Does MWeb support alaw/ulaw or only g729?

And if so, did you buy the lic for atleast 1 lic for g729

Mweb supports g729 and alaw.

I am testing without g729 today.

Yes we have a 10 channel lic

 

[Fl3tch]

I got it working in my test environment, you have to play around in the settings. The have changed the layout but it is possible. It is a b**ch but works

Can you maby send a screenshot of your peer settings page